WATTS® 0548012 2-Piece Ball Valve With Handle, 1/2 in, 125 lb, Stainless Steel Body, Full Port, Import
WAT12SFBV1
MFG #: 0548012
- Body Material: Stainless Steel
- Domestic / Import: Import
- Nominal Size: 1/2 in
- Port Type: Full
- Pressure Class: 125 Lb
- Ball Material: Stainless Steel
- Inlet to Outlet Length: 2-3/8
- Manufacturer: Watts Water Technologies
- Manufacturer #: 0548012
- Media: Gas/Liquid
- Pressure Rating: 1000 psi
- Temperature Rating: 0 to 400 degF
- Top to Inlet Center: 2
- Trim Material: Stainless Steel Stem and RPTFE Seat
- Type: 2-Piece
Series S-FBV-1 2-Piece, Full Port, Stainless Steel Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a bottom-loaded blow-out proof stem, PTFE seats and stem thrust bearing, a stainless steel ball and stainless steel body with mounting pads for actuation. Pressure Rating: 1000psi WOG (non-shock) and 125psi WSP.
WATTS® Ball Valve, 2-Piece, 1/2 in Nominal, 1000 psi, 125 lb, 0 to 400 deg F, Full Port, Media: Gas/Liquid, Stainless Steel Ball, 2-3/8 in Inlet to Outlet Length, 2 in Top to Inlet Center, Stainless Steel Body, Stainless Steel Stem and RPTFE Seat Trim, Import
WATTS® Ball Valve, 2-Piece, 1/2 in Nominal, 1000 psi, 125 lb, 0 to 400 deg F, Full Port, Media: Gas/Liquid, Stainless Steel Ball, 2-3/8 in Inlet to Outlet Length, 2 in Top to Inlet Center, Stainless Steel Body, Stainless Steel Stem and RPTFE Seat Trim, Import
- Features
- Pressure rated at 1000 psi (69 bar) WOG non-shock and 125 psi (8.6 bar) WSP
- Adjustable stem packing
- Bottom loaded blow-out proof stem
- Drilled and tapped mounting pad
- Standard Latch-Lok handle to lock in open or close position
- PTFE stem packing, thrust washer and body seal
- Vinyl insulator on heavy duty 304SS handles
- Low operating torque
- Each valve factory tested
- Conforms to MSS-SP-110 and API-598
- The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight
- The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight