Smith-Blair

Smith-Blair 274-00000905-000 Bell Joint Leak Clamp With Nuts and (6) Bolts, 8 in Pipe, Ductile Iron, Epoxy

SMI8274 MFG #: 274-00000905-000
Smith-Blair 274-00000905-000 Bell Joint Leak Clamp With Nuts and (6) Bolts, 8 in Pipe, Ductile Iron, Epoxy
  • Finish: Epoxy
  • Material: Ductile Iron
  • Pipe Size: 8 in
  • Manufacturer: Xylem
  • Manufacturer #: 274-00000905-000
  • Outside Diameter: 9.05 to 9.3 in
  • Series: 274
  • Temperature Rating: -20 to 180 degF
Smith-Blair 274 bell joint leak clamps provide a fast, economical means of sealing or preventing leaks in cast iron bell, and spigot caulked or rubber ring joints. The design of the Kee-Lok® gaskets and Bell-Spigot rings enable a single clamp to fit both caulked and rubber ring joints on virtually all classes and brands of cast iron pipe in nominal sizes up to 36-inches. They are also suitable for use on AWWA C-900 PVC pipe thru 24-inches (longer bolts are required).

Smith-Blair Bell Joint Leak Clamp, Series: 274, 8 in Pipe, 9.05 to 9.3 in Outside Dia, Ductile Iron, Epoxy, -20 to 180 deg F
  • Features
  • Designed to fit both caulked or rubber ring joints in virtually all classes and brands of cast iron or ductile iron pipe within same nominal size
  • Suitable for use on C900 and C905 PVC through 24 in with the use of longer bolts-DR 18 minimum
  • Kee-Lok gasket design eliminates need for field cutting gaskets the ends are easily joined no need of staples, tongs, tape or other gadgets to hold the gasket ends together (not available in 14, 30 or 36 in)
  • Flexi-Coat® fusion bonded epoxy finish standard for great corrosion resistance
  • Can be used to prevent leaking bell gaskets as well as repairing them
  • Can be installed without interrupting the flow of the pipeline
  • Front and back pieces are interchangeable
  • All bell spigot pieces are identical, making installation easier
  • Ductile iron bell spigot ring
  • Nitrile (Buna-N) gasket compounded to resist oil, natural gas, acids, alkalis, most (aliphatic) hydrocarbon, water and other chemicals
  • High strength, low alloy steel with heavy bolts, semi-finished hexagon nuts two inch clamps have electro galvanized steel studs
  • 150 psi (water) working pressure
  • Stainless steel nuts and bolts
  • 5/8 x 10-1/2 in bolt