StrongArm™ LockBlock™ 525-162PBPK Bracketing System With (2) PEX Bend LockBlock, 25 lb, Steel, Galvanized, Domestic

SIO525162PBPK MFG #: 525-162PBPK

Domestic / Import: Domestic
Finish: Galvanized
Load Capacity: 25 lb
Material: Steel
Manufacturer: Sioux Chief
Manufacturer #: 525-162PBPK
Series: 525-PB
Temperature Rating: 140 degF

Sioux Chief 525-PB series StrongArm&rade; with Plastic Bend Support preassembled bracketing system shall be used when penetrating a wall with 1/2" PEX. Brackets shall be corrosion-resistant and secured to wood or metal studs with approved hardware. System shall include plastic bend (elbow) device that swivels 360 deg when captured within a LockBlock&rade; assembly. Plastic Bend Support shall slide across pair of parallel brackets allowing installer to secure 1/2" PEX tube at any desired location within the stud cavity. Bracket assembly with Plastic Bend Support devices and bulk components shall be IAPMO listed.

StrongArm™ LockBlock™ Bracketing System, Series: 525-PB, 25 lb, Steel, Galvanized, 140 deg F, Domestic

Features

Use when stubbing out with -1/2 in flexible CTS tube
StrongArm™ brackets provide a very rigid installation
Plastic elbow swivels 360 deg to work with tubing coming from any direction
Pex bend LockBlocks™ are pre-assembled on each pair of brackets
Position stub outs at any desired location within the stud bay
Twisted brackets mount to face of stud, and L-bent brackets mount inside stud cavity
When screws on blocks are tightened, blocks compress on tube, brackets and elbow eliminating all movement
For 16 in stud bays
ABS plastic elbow/bend
16 ga galvanized steel bracket
#6 x 1 in coarse-thread, zinc-plated bugle head screw
Individually bar coded(IBC)