Sioux Chief

PowerBar™ 523-2434 Universal Bracket, Steel, Zinc Plated, Domestic

SIO5232434 MFG #: 523-2434
PowerBar™ 523-2434 Universal Bracket, Steel, Zinc Plated, Domestic
  • Domestic / Import: Domestic
  • Finish: Zinc Plated
  • Material: Steel
  • Dimensions: 0.529 in H x 0.602 in W
  • Manufacturer: Sioux Chief
  • Manufacturer #: 523-2434
  • Series: 523-24
Sioux Chief 523 Series PowerBar universal bracketing system shall be used where necessary for supporting pipe or stub outs. Bracket shall be corrosion resistant, adjust telescopically from 14 to 26 in, and have dual fastening tabs on each end. Pilot holes for number 6 to 10 screws shall be provided on three sides of the bracket. System shall include screws for fastening tabs, and optional adjustable channel clamps with elastomer inserts for fastening any pipe, tube, cable, etc. System shall be approved for use with copper tube, CPVC tube, PEX or PB tube, steel pipe, CSST lines, plastic or steel conduit, and low voltage DataCom cable. System shall be UV resistant.

PowerBar™ Universal Bracket, Series: 523-24, Steel, Zinc Plated, 0.529 in H x 0.602 in W, Domestic
  • Features
  • Includes
  • Product Videos
  • Patent # 6,446,915
  • Patent # 6,402,096
  • Galvanized steel bracket and tough plastic clamp are strong and support tube or pipe without bowing
  • Available with one, two or three touch down clamp pre-loaded to reduce installation time
  • Shorter bracket expand to fit opening from 9 to 16 in
  • Clamp secure 1/4 to 1 in CTS copper, CPVC or PEX
  • Polyvinylidene fluoride (PVC), meets ASTM E84 25/50 and UL94 V-O flame rating channel clamp (orange)
  • Nylon 66, V2 flame rating channel clamp (black)
  • TPE (black clamp), PVDF (orange clamp) clamp insert
  • (8) 1 in Phillips, panhead, drill tip, zinc plated screw
  • Adjust bracket telescopically to desired L (bracket must have a minimum center overlap of 2 in)
  • Fasten all four tabs to building member, slide channel clamp (if applicable) to desired location along bracket
  • Place conduit between clamp posts, and engage clamp bridge, ratchet bridge of channel clamp down over both posts evenly
  • It is permissible to use one bracket section and fasten directly through channel
  • 20 ga steel
(1) Bracket, (3) TouchDown™ Clamp, (4) Drill-Tip Screws, (3) Nylon Channel Clamp, (4) Screws