Oatey®

Oatey® FlowGuard Gold® 31914 Medium 1-Step Low VOC CPVC Cement, 1 gal, Translucent Liquid, Yellow

OAT31914 MFG #: 31914
Oatey® FlowGuard Gold® 31914 Medium 1-Step Low VOC CPVC Cement, 1 gal, Translucent Liquid, Yellow
  • Color: Yellow
  • Container Size: 1 gal
  • Form: Translucent Liquid
  • Flash Point: 14 to 23
  • Manufacturer: OATEY
  • Manufacturer #: 31914
  • Odor / Scent: Solvent
  • Type: Medium 1-Step Low VOC
  • VOC Content: 470
Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

Oatey® FlowGuard Gold® CPVC Cement, Medium 1-Step Low VOC, 1 gal, For Use With: 2 in Dia Copper Tube/CPVC Hot and Cold Potable Water Pipe and Fittings, Translucent Liquid, Yellow, Solvent, 470 g/L VOC, 14 to 23 deg F Flash, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
  • Features
  • All weather yellow cement solvent welds CPVC
  • For cold and hot water systems up to 200°F / 93°C
  • Helps protect pipes from corrosion
  • Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
  • Approved for use with FlowGuard Gold® piping systems (registered trademark of Lubrizol Corporation)
  • Recommended application temperature of 0°F to 110°F / -17°C to 43°C
  • No primer needed where local codes permit
  • Low VOC, high performance solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, meets ASTM Standard F493 and complies with NSF/ANSI 61 health effects requirements