Oatey®

Oatey® FlowGuard Gold® 31910 1-Step All Weather CPVC Cement, 4 oz Can, Translucent Liquid, Yellow, 0.94

OAT31910 MFG #: 31910
Oatey® FlowGuard Gold® 31910 1-Step All Weather CPVC Cement, 4 oz Can, Translucent Liquid, Yellow, 0.94
  • Color: Yellow
  • Container Size: 4 oz
  • Container Type: Can
  • Form: Translucent Liquid
  • Specific Gravity: 0.94
  • Curing Time: 1 or 6 hr
  • Flash Point: 14 to 23
  • Manufacturer: OATEY
  • Manufacturer #: 31910
  • Net Weight: 0.3
  • Odor / Scent: Solvent
  • Setting Time: 4 to 5
  • Suitable For Use With: Hot and Cold Water System
  • Temperature Rating: 0 to 110 degF
  • Type: 1-Step
  • VOC Content: 470
Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

Oatey® FlowGuard Gold® All Weather CPVC Cement, 1-Step, 4 oz, Can, 0.3 lb Net Weight, For Use With: Hot and Cold Water System, Translucent Liquid, Yellow, Solvent, 470 g/L VOC, 14 to 23 deg F Flash, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, 0.94 Specific Gravity, 4 to 5 min Setting Time, 1 or 6 hr Curing, 0 to 110 deg F
  • Features
  • Product Videos
  • All weather yellow cement solvent welds CPVC, dauber included
  • For cold and hot water systems up to 200°F / 93°C
  • Helps protect pipes from corrosion
  • Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
  • Approved for use with FlowGuard Gold® piping systems (registered trademark of Lubrizol Corporation)
  • Recommended application temperature of 0°F to 110°F / -17°C to 43°C
  • No primer needed where local codes permit
  • Low VOC, high performance solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, meets ASTM Standard F493 and complies with NSF/ANSI 61 health effects requirements
  • 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting