NIBCO® NL95005 T-585-70 2-Piece Ball Valve, 3/8 in, NPT, Cast Red Bronze Body, Full Port, PTFE Softgoods, Domestic
NT58570C
MFG #: NL95005
- Body Material: Cast Red Bronze
- Domestic / Import: Domestic
- End Style: NPT
- Nominal Size: 3/8 in
- Port Type: Full
- Softgoods Material: PTFE
- Actuator Type: Standard Lever
- Ball Material: Chrome Plated Brass
- Inlet to Outlet Length: 2
- Manufacturer: NIBCO Inc.
- Manufacturer #: NL95005
- Media: Air/Gas/Water
- Orifice Size: 0.38
- Pressure Rating: 600 psi
- Series: T-585-70
- Temperature Rating: 400 degF
- Top to Inlet Center: 1-3/4
- Trim Material: Silicon Bronze Stem
- Type: 2-Piece
The NIBCO® bronze ball valve provides bubble-tight shut-off at 600 psi. With the reinforced PTFE seat ring and brass hard chrome plated ball, the valve exhibits high chemical resistance properties. The 2-Piece valve is recommended for many high pressure applications, HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 deg) open to close. The 2-Piece valve features thread ends for easy installation. Please refer to NIBCO® technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO® INC. 5-year 125% limited warranty.
NIBCO® Ball Valve, 2-Piece, Series: T-585-70, 3/8 in Nominal, NPT End Style, 600 psi Pressure, 400 deg F, Full Port, Media: Air/Gas/Water, 0.38 in Orifice, Standard Lever Actuator, Chrome Plated Brass Ball, 2 in Inlet to Outlet Length, 1-3/4 in Top to Inlet Center, Cast Red Bronze Body, Silicon Bronze Stem Trim, PTFE Softgoods, Domestic
NIBCO® Ball Valve, 2-Piece, Series: T-585-70, 3/8 in Nominal, NPT End Style, 600 psi Pressure, 400 deg F, Full Port, Media: Air/Gas/Water, 0.38 in Orifice, Standard Lever Actuator, Chrome Plated Brass Ball, 2 in Inlet to Outlet Length, 1-3/4 in Top to Inlet Center, Cast Red Bronze Body, Silicon Bronze Stem Trim, PTFE Softgoods, Domestic
- Features
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
- Blowout-proof stem
- Dezincification resistant
- PTFE seat ring/packing
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Standard lever handle, optional NIB-SEAL®