NIBCO® NJ8300C S-580-70 2-Piece Ball Valve, 1-1/2 in, Solder, Cast Red Bronze Body, Conventional Port, PTFE Softgoods, Domestic

The NIBCO® bronze ball valve with solder end connections provides bubble-tight shut-off at 600 psi. The valve's reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties and is recommended for many high pressure applications. The valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled water. The valve may be used for isolation and throttling (half open to full open only). The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 deg) open to close. Options include NIB-SEAL® insulated handle that eliminates condensate. The valve is ideal for commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam and hot water heating service. Please refer to NIBCO® technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO® INC. 5-year 125% limited warranty.

NIBCO® Ball Valve, 2-Piece, Series: S-580-70, 1-1/2 in Nominal, Solder End Style, 600 psi Pressure, 400 deg F, Conventional Port, Media: Air/Gas/Water, 1-1/4 in Orifice, Lever Handle Actuator, Stainless Steel Ball, 4.44 in Inlet to Outlet Length, 3 in Top to Inlet Center, Cast Red Bronze Body, Stainless Steel Stem Trim, PTFE Softgoods, Domestic