Honeywell T7351F2010/U Thermostat, Programmable Thermostat
HONT7351F2010
MFG #: T7351F2010/U
- Control Range: 40 to 90 deg F
- Domestic / Import: Import
- Switch Action: SPST
- Switch Type: Auxillary Relay
- Thermostat Type: Programmable
- Color: Trident White
- Display Type: LCD
- Fan Switching: Auto/On
- Humidity Range: 5 to 90% Non-Condensing
- Manufacturer: Honeywell
- Manufacturer #: T7351F2010/U
- Number of Stages: 6
- Series: T7351F
- Stages Cool: 3
- Stages Heat: 3
- System Switching: Heat/Off/Cool/Auto
- Voltage Rating: 24 VAC
The T7351 Commercial Programmable Thermostat controls 24 VAC commercial single zone heating, ventilating and air conditioning (HVAC) equipment. The thermostat includes the keypad and display for 365-day programming and equipment control connections.
Thermostat, Series: T7351F, Programmable Thermostat, 40 to 90 deg F Control Range, SPST, Auxillary Relay Switch, System Switching: Heat/Off/Cool/Auto, Fan Switching: Auto/On, 6 Stage, 3 Stages Heat, 3 Stages Cool, 5 to 90% Non-Condensing Humidity, LCD, 24 VAC, Trident White, Import
Thermostat, Series: T7351F, Programmable Thermostat, 40 to 90 deg F Control Range, SPST, Auxillary Relay Switch, System Switching: Heat/Off/Cool/Auto, Fan Switching: Auto/On, 6 Stage, 3 Stages Heat, 3 Stages Cool, 5 to 90% Non-Condensing Humidity, LCD, 24 VAC, Trident White, Import
- Features
- Includes
- Typically used in buildings (including - restaurants, shopping malls, office buildings and banks) under 55,000 sq-ft
- For single zone rooftop units, split systems, heat pumps or hot/chilled water systems
- 365 day programming
- Two occupied and two not occupied periods per day
- Individual heat and cool set points available for occupied and not occupied periods
- P+I+D control minimizes temperature fluctuations
- Recovery ramping control automatically optimizes equipment start times based on building load
- Convenient overrides allow temporary set point changes
- Remote sensor capability for temperature (including outdoor air and discharge air) and humidity sensors
- Auxiliary sub-base contact typically interface with a Honeywell® economizer system (for total rooftop control integration) or act as dehumidification output
Keypad and Display