Dixon®

Dixon® RDM26 Hose Mender, 2 in, 316 Stainless Steel, Domestic

DIXRDM262316SS MFG #: RDM26
Dixon® RDM26 Hose Mender, 2 in, 316 Stainless Steel, Domestic
  • Domestic / Import: Domestic
  • Fitting / Connector Type: Mender
  • Material: 316 Stainless Steel
  • Nominal Size: 2 in
  • Barb Length: 2-9/32
  • Length: 4-9/16 in
  • Manufacturer: Dixon Valve & Coupling
  • Manufacturer #: RDM26
Dixon® Hose Mender, Fitting/Connector Type: Mender, 2 in Nominal Size, 4-9/16 in Length, 2-9/32 in Barb Length, 316 Stainless Steel, Domestic
  • Features
  • Product Videos
  • Mender for connecting two hoses of the same diameter in a straight run
  • Hose barbs on both ends
  • 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel
  • Barbed fitting for a tight seal on hoses
  • For use with a hose clamps or crimp sleeve or ferrule
  • Menders are not for compressible products such as air, nitrogen or steam
  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
  • Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
  • Do not use in connection with drinking water
  • Wash hands after handling