DISCALDIRTMAG® 546169A Air and Dirt Separator With Magnet, 2 in, Press Union Connection, 150 psi, 25 gpm, 32 to 230 deg F, Steel
CLF546169A
MFG #: 546169A
- Connection Type: Press Union
- Material: Steel
- Nominal Size: 2 in
- Temperature Rating: 32 to 230 degF
- Working Pressure: 150 PSI
- Dimensions: 15-3/4 in L
- Flow Rate: 25 gpm
- Manufacturer: Caleffi
- Manufacturer #: 546169A
- Series: 5461
The Caleffi DISCALDIRTMAG® magnetic air and dirt separator incorporates three important functions for hydronic systems: air separation, dirt separation and ferrous impurity separation. An internal screen element facilitates the coalescing and capture of micro-bubbles to facilitate high performance automatic air removal, while concurrently causing the capture of non-ferrous debris particles down to 5 micron size. A powerful magnetic field induced by rare-earth neodymium magnets facilitates the capture of ferrous impurities such as iron oxide down to microscopic size thus delivering 2-1/2 times the ferrous impurity removal performance of standard air and dirt separators. The DISCALDIRTMAG® saves on system installation and maintenance costs as three devices are combined into one. Additionally, all captured debris is blown down through the purge valve without taking the system offline.The circulation of fully de-aerated and cleaned water enables the equipment to operate under optimum conditions, free from noise, corrosion or mechanical damage.
Caleffi DISCALDIRTMAG® Air and Dirt Separator, Series: 5461, 2 in Nominal, Press Union, 150 psi Working, 32 to 230 deg F, Water/Glycol Solution Suitable Media, 25 gpm, 50 % Maximum Percentage of Glycol, 5 um Particle Separation Capacity, Steel, 15-3/4 in L
Caleffi DISCALDIRTMAG® Air and Dirt Separator, Series: 5461, 2 in Nominal, Press Union, 150 psi Working, 32 to 230 deg F, Water/Glycol Solution Suitable Media, 25 gpm, 50 % Maximum Percentage of Glycol, 5 um Particle Separation Capacity, Steel, 15-3/4 in L
- Features
- Product Videos
- Stainless steel float guide pin and linkage
- Stainless steel mesh internal element
- Epoxy resin coated steel body