Goulds

Goulds 18HS15422C Standard Capacity Submersible Pump With M15422 CentriPro motor, 4", 2 Wires, 11 Stages, 230V, 1-1/2 hp

GOU18HS15422C MFG #: 18HS15422C
Goulds 18HS15422C Standard Capacity Submersible Pump With M15422 CentriPro motor, 4", 2 Wires, 11 Stages, 230V, 1-1/2 hp
  • Flow Rate: 18 gpm
  • Number of Stages: 11
  • Number of Wires: 2
  • Series: HS
  • Voltage Rating: 230 v
  • Bearing Type: Proprietary Engineered Polymer
  • Frequency Rating: 60 Hz
  • Impeller Type: Noryl®
  • Manufacturer: Xylem
  • Manufacturer #: 18HS15422C
  • Material: 304 Stainless Steel
  • Maximum Head: 250
  • Motor HP: 1-1/2 hp
  • Motor Speed: 3450 rpm
  • Type: Standard Capacity
  • Weight: 5.6 lb
The Goulds Water Technology HS series 4 in submersible pumps feature top quality materials and construction to provide reliable and efficient service. HS series 4 in submersible pumps are available in 5, 7, 10, 18 and 25 gallon per minute sizes equipped with 1/2 hp to 1-1/2 hp motors.

Goulds Submersible Pump, Series: HS Series, 18 gpm, 2 Wires, 11 Stages, 250 ft Maximum Head, 1-1/2 hp, 230 VAC, 60 Hz, 3450 rpm Motor, Noryl® Impeller, Proprietary Engineered Polymer Bearing, 304 Stainless Steel
  • Features
  • Powered by CentriPro 4 in motors for dependable operation and long service life
  • Nylon discharge head features built-in, o-ring seal check valve which is easily removed without pump disassembly
  • Nylon motor adapter for strength and corrosion resistance
  • Stainless steel hex design shafts, shaft couplings, casings and stage bowls inhibit corrosion
  • Noryl® engineered composite impellers for abrasion resistance and durability
  • Lexan® engineered composite diffusers are abrasion resistant
  • All engineered composite components are non-toxic, non-leaching, FDA compliant materials
  • Goulds water technology field proven floating impeller stack design for superior sand and abrasive handling and durability
  • Quad lock technology: 4 roll formed grooves provide durability and strength, tested to exceed strength of poly and PVC pipes
  • Crimped design for strength, will not separate in the harshest conditions
  • 3.90 in effective diameter with cable guard
  • 1-1/4 in NPT discharge
  • 4 in motor
  • 1 phase
  • 16.8 in water end L
  • 6 to 28 gpm recommended flow range
  • Model 18HS