A.O. Smith® 100281161 Tankless Water Heater With Integrated Recirculation Pump, Natural Gas, Residential
AOSATI540PN
MFG #: 100281161
- Commercial / Residential / Dual: Residential
- Energy Factor: 0.93
- Flow Rate: 10 gpm
- Heating Capacity: 199,000 BTU/hr
- Indoor / Outdoor: Indoor
- Ultra Low NOx: Yes
- Vent Size: 3 in, 4 in
- Vent Type: Power Direct
- Condensing / Non-Condensing: Condensing
- Dimensions: 17-3/4 in W x 11-1/4 in D x 23-5/8 in H
- Gas Connection: 3/4 in NPT
- Ignition Type: Electronic Spark
- Manufacturer: A.O. Smith
- Manufacturer #: 100281161
- Pressure Rating: 15 to 150 psi
- Water Connection: 3/4 in NPT
Ultra-Low NOx gas tankless water heaters with condensing technology featuring an up to 0.95 Uniform Energy Factor (UEF) which lowers operating costs and is environmentally friendly.
Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.
A.O. Smith® Tankless Water Heater, 199000 Btu/hr Heating, Natural Gas, 3/4 in NPT Gas Connection, Electronic Spark Ignition, Power Direct Vent, 3 or 4 in Vent, Condensing/Non Condensing: Condensing, 10 gpm, 0.93, 3/4 in NPT Water Connection, 15 to 150 psi, Ultra Low NOx: Yes, Indoor/Outdoor: Indoor, 17-3/4 in W x 11-1/4 in D x 23-5/8 in H, Residential
Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.
A.O. Smith® Tankless Water Heater, 199000 Btu/hr Heating, Natural Gas, 3/4 in NPT Gas Connection, Electronic Spark Ignition, Power Direct Vent, 3 or 4 in Vent, Condensing/Non Condensing: Condensing, 10 gpm, 0.93, 3/4 in NPT Water Connection, 15 to 150 psi, Ultra Low NOx: Yes, Indoor/Outdoor: Indoor, 17-3/4 in W x 11-1/4 in D x 23-5/8 in H, Residential
- Features
- Includes
- Includes integrated temperature and pump controls with advanced diagnostics that simplify installation and troubleshooting
- Durable heat exchanger - Primary heat exchanger is constructed of a commercial-grade copper that is more resilient to erosion
- Secondary heat exchanger is made of type 316L stainless steel to protect against corrosion
- Easy-link 540P with three other 540H to increase flow capacity
- Common vent up to 8 units
- Safety features - Air-fuel ratio (AFR) sensor, exhaust and water temperature safety, control and overheat cut-off fuse
- Internal freeze protection system
- Category III venting can be used
- Exhaust, 3 in PVC venting up to 70 Ft or 4 in PVC venting up to 100 Ft
- Provides flexible venting with PVC, CPVC or ABS pipe for intake and exhaust (solid core only)
- Model certified from 0 to 10100 ft elevations
Factory-Installed Power Cord