A.O. Smith

A.O. Smith® Vertex™ 100210450 GPHE-50 50 Gallon Gas Water Heater, 76000 Btu/hr Heating, Natural Gas Fuel, Power Vent, Condensing, Tall

AOSGPHE50N MFG #: 100210450
A.O. Smith® Vertex™ 100210450 GPHE-50 50 Gallon Gas Water Heater, 76000 Btu/hr Heating, Natural Gas Fuel, Power Vent, Condensing, Tall
  • Condensing / Non Condensing: Condensing
  • Recovery Rate: 92 gph at 90 deg F
  • Tall or Short: Tall
  • Tank Capacity: 50 gal
  • Vent Type: Power Vent
  • Dimensions: 22 in Dia x 71-1/8 in H
  • Manufacturer: A.O. Smith
  • Manufacturer #: 100210450
  • Pressure Rating: 150 psi
  • Series: GPHE-50
The GPHE-50 Vertex™ Power Vent gas water heater delivers a money-saving 90% efficiency rating and is designed specifically to generate a constant flow of 3 gallons per minute, resulting in continuous hot water for your home.

Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.

A.O. Smith® Vertex™ Gas Water Heater, Series: GPHE-50, 76000 Btu/hr Heating, Natural Gas, 50 gal Tank, Electronic Ignition, Power Vent, Condensing/Non condensing: Condensing, 92 gph at 90 deg F Recovery, Energy Factor: 0.9, 3/4 in MNPT Water Connection, 150 psi, Tall or Short: Tall, Ultra Low Nox: No, 22 in Dia x 71-1/8 in H
  • Features
  • Helical internal heat exchanger - Spiral heat exchanger keeps hot combustion gases in the tank longer to lengthen the heat transfer cycle, positioned in the center of the tank for more even heat distribution
  • Operates at 90% thermal efficiency, which saves money on operating costs compared to a standard 78% efficient gas water heater
  • Power vent design - Combined vertical and horizontal runs terminating through an outside wall, vents using PVC, CPVC or polypropylene pipe, Canadian installations require ULC S636 approved pipe for venting
  • Modular blower equipped with 120 V, 60 Hz electrical system (rating 5 A or less), 6 ft cord with standard 3-prong connector
  • 2 in PVC pipe, elbows and condensate drain supplied to connect heat exchanger outlet to blower
  • Side-mounted hot and cold recirculating taps - Allows vertex to be installed as part of combination space heating/water heating applications or any system requiring a recirculating hot water loop, including radiant floor heating
  • Intelli-Vent™ gas control - Equipped with a robust silicon nitride hot surface ignitor, no standing pilot
  • Advanced electronics for more precise control of water temperature and easy to understand system diagnostics
  • Blue Diamond® glass coating
  • Green Choice® gas burner - Patented "Eco-Friendly" design reduces NOx emissions by up to 33% and complies with low- NOx emission requirements of less than 40 ng/J
  • Certified for sea level to 5300 ft elevation