A.O. Smith® 100223053 50 Gallon Gas Water Heater, 40000 Btu/hr Heating, Natural Gas Fuel, Magnesium Anode Rod, Atmospheric Vent, Tall
AOSFMDV50MAR
MFG #: 100223053
- Fuel Type: Natural Gas
- Recovery Rate: 39 gph at 90 deg F
- Tall or Short: Tall
- Tank Capacity: 50 gal
- Ultra Low NOx: No
- Vent Type: Atmospheric Vent
- Dimensions: 22 in Dia x 60 in H
- Energy Factor: 0.56
- Gas Connection: 1/2 in Female
- Manufacturer: A.O. Smith
- Manufacturer #: 100223053
- Pressure Rating: 150 psi
- Vent Size: 3 in
- Water Connection: 3/4 in
Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.
A.O. Smith® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas, 1/2 in Female Gas Connection, 50 gal Tank, Direct Vent, 3 in Vent, 39 gph at 90 deg F Recovery, Energy Factor: 0.56, 3/4 in Water Connection, 150 psi, Tall or Short: Tall, Ultra Low Nox: No, 22 in Dia x 60 in H
A.O. Smith® Gas Water Heater, 40000 Btu/hr Heating, Natural Gas, 1/2 in Female Gas Connection, 50 gal Tank, Direct Vent, 3 in Vent, 39 gph at 90 deg F Recovery, Energy Factor: 0.56, 3/4 in Water Connection, 150 psi, Tall or Short: Tall, Ultra Low Nox: No, 22 in Dia x 60 in H
- Features
- Gas control convertible for natural and propane gas for flexibility to meet the varying needs of manufactured housing installations
- Side-mounted 3/4 in cold water inlet for ease of installation when cold water supply originates below the structure
- Top mounted 3/4 in hot water outlet
- Direct vent models package with bottom intake air vent to draw all combustion make-up air from outside the structure
- Green Choice® gas burner - Patented "Eco-Friendly" design reduces NOx emissions by up to 33% and complies with low- NOx emission requirements of less than 40 ng/J
- Coregard™ anode rod - Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection for longer than standard anode rods
- Blue Diamond® glass coating - Provides superior corrosion resistance compared to industry standard glass lining
- Enhanced-flow brass drain valve - Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve
- Uses a standard female hose fitting that allows for fast and easy draining during maintenance
- Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off
- Manufactured housing direct vent
- Approved fro installation from sea level to 5400 ft elevation