EVENTS & HOLIDAYS
EXCLUSIVE OFFERS
A.O. Smith® 100211205 BPD-80 Gas Water Heater, 75 gal Tank, Natural Gas Fuel
AOSBPD80N
MFG #: 100211205
- Fuel Type: Natural Gas
- Ignition Type: Over Spark
- Tall or Short: Tall
- Tank Capacity: 75 gal
- Ultra Low NOx: No
- Vent Type: Power Direct
- ASME(Yes / No): No
- Dimensions: 26 in W x 70-5/8 in H
- Manufacturer: A.O. Smith
- Manufacturer #: 100211205
- Pressure Rating: 150 psi
- Recovery Rate: 82 gph at 90 deg F Rise
- Series: BPD-80
- Water Connection: 3/4 in NPT
The BPD-80 tank-type commercial gas water heater is intended for light-duty applications such as small office buildings and duplex apartment homes. The BPD-80 features a power direct-vent design, with a factory installed blower. The blower permits sealed combustion direct-vent operation, with separate venting and air intake runs from outside the structure. The BPD-80 offers installation versatility by allowing venting and intake runs up to 50 ft equivalent, using 3 in SCH 40/STD PVC pipe. The power direct vent design also eliminates the potential for performance and safety problems caused by negative air pressure, a problem found in many commercial applications with inadequate indoor ventilation.
Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.
A.O. Smith® Conservationist® Gas Water Heater, Series: BPD-80, 76000 Btu/hr Heating, Natural Gas, 1/2 in NPT Gas Connection, 75 gal Tank, Over Spark Ignition, Power Direct Vent, 82 gph at 90 deg F Rise Recovery, 3/4 in NPT Water Connection, 150 psi, Tall, Ultra Low NOx: No, ASME(Yes/No): No, 26 in W x 70-5/8 in H
Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.
A.O. Smith® Conservationist® Gas Water Heater, Series: BPD-80, 76000 Btu/hr Heating, Natural Gas, 1/2 in NPT Gas Connection, 75 gal Tank, Over Spark Ignition, Power Direct Vent, 82 gph at 90 deg F Rise Recovery, 3/4 in NPT Water Connection, 150 psi, Tall, Ultra Low NOx: No, ASME(Yes/No): No, 26 in W x 70-5/8 in H
- Features
- Dynaclean™ diffuser dip tube - Helps reduce lime and sediment buildup and maximizes hot water output, made from long-lasting PEX cross-linked polymer
- Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off
- Powered direct venting provides more venting flexibility
- Allowable vent lengths of up to 125 equivalent feet make installation easy in any situation
- Quiet modular blower built-in safety device prevents pilot or main burner operation if blower is not operating