Honeywell Home

Honeywell VC4011ZZ11/U Line Volt Valve Actuator, 0.4 in Stroke, Plastic Body, Import

HONVC4011ZZ11E MFG #: VC4011ZZ11/U
Honeywell VC4011ZZ11/U Line Volt Valve Actuator, 0.4 in Stroke, Plastic Body, Import
  • Body Material: Plastic
  • Domestic / Import: Import
  • Stroke: 0.4 in
  • Electrical Connections: 39 in Plenum-Rated Cable
  • Manufacturer: Honeywell
  • Manufacturer #: VC4011ZZ11/U
  • Mounting Type: Direct Coupled
  • Operation Range: 5 to 95% RH
  • Power Consumption: 6
  • Power Supply: 100 to 130
  • Signal Type: 2 Position/SPST
  • Suitable For Use With: VC V Seriesalve
  • Timing: 6 sec at 60 Hz
  • Type: Line Volt
Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the model selected, it can be controlled by either a low or line voltage SPST or SPDT controller such as a room thermostat.

Valve Actuator, Line Volt, 0.4 in, 5 to 95% RH, 6 VA, 6 sec at 60 Hz Timing, 2 Position/SPST Signal, 100 to 130 V Supply, 39 in Plenum-Rated Cable, 32 to 150 deg F Ambient, Direct Coupled Mount, Plastic Body, For Use With: VC V Seriesalve, Import
  • Features
  • Minimal actuator power consumption
  • Quick and easy replacement of moving parts
  • Actuator head installation does not require draining the system
  • ON/OFF models with 6 sec nominal timing
  • Use 2-position actuators with 1000 series 2-way and 6000 Series 3-way VC valve bodies only
  • All VC series actuator-valve combinations provide 60 psi close-off
  • -40 to 150 deg F shipping and storage temperature
  • Environmental, electrical or ingress protection rating: Double insulated, IP40
  • No internal auxiliary switch
  • 203 deg F fluid temperature
  • Fail safe mode: Stays in place
  • Molded strain relief cable
  • Lever manual operation
  • 50/60 Hz frequency
  • Self-alignment shaft adapter
  • 60 psid maximum differential pressure (close-off)
  • Non-condensing humidity
  • 2.8 in H x 3.7 in W x 2.7 in D