Powers®

ETV200-1 XP Series, ETV200 Emergency Tempering Valve With Cold Water Bypass

POWETV20010 MFG #: ETV200-1
ETV200-1 XP Series, ETV200 Emergency Tempering Valve With Cold Water Bypass
  • Domestic / Import: Domestic
  • End Style: NPT
  • Flow Rate: 46.5 gpm
  • Nominal Size: 3/4 x 1 in
  • Pressure Rating: 60 psi
  • Dimensions: 11-5/8 in L
  • Finish: Rough Bronze
  • Manufacturer: Watts Water Technologies
  • Manufacturer #: ETV200-1
  • Series: XP Series
  • Temperature Rating: 60 to 95 degF
This 3/4 x 1 in HydroGuard XP emergency tempering valve with cold water bypass is designed to thermostatically blend hot and cold water to deliver tepid water to emergency fixtures, quickly compensating for temperature variations due to changes in inlet temperature or pressure. For use with emergency fixtures in compliance with ANSI Z358.1 and is ASSE 1071 listed. It features advanced paraffin actuation technology, dirt and lime resistant plunger design and Vandal-resistant locking mechanism. This valve body has a rough bronze finish, 3/4 in NPT inlet and 1 in NPT outlet, rotatable triple duty check stops and is factory set at 85 deg F.

Powers™ HYDROGUARD® Emergency Tempering Valve, Series: XP, 3/4x1 in Nominal, NPT, 60 psi, 60 to 95 deg F, 46.5 gpm, Rough Bronze, 11-5/8 in L, Domestic
  • Features
  • Corrosion resistant polysulfone internals
  • Factory set at 85 deg F
  • Powers advanced thermal actuator provides precise temperature control
  • Exclusive internal cold water bypass ensures cold water flow in the event of loss of hot water
  • Flow effectively shuts down upon loss of cold water supply when tested under the condition specified in ASSE 1071 standard
  • Vandal-resistant locking mechanism to secure temperature setting
  • 85 deg F factory set
  • Rotatable union triple-duty check stops
  • 180 deg F hot water