NIBCO® NLJ300E N-200-235 Lug Style International Butterfly Valve, 2-1/2 in, Cast Iron Body, EPDM/Buna-N Softgoods, Import
NN200235LHL
MFG #: NLJ300E
- Body Material: Cast Iron
- Domestic / Import: Import
- Nominal Size: 2-1/2 in
- Softgoods Material: EPDM/Buna-N
- Type: Lug Style International
- Actuator Type: Lever
- Dimensions: 1.95 in ID
- Manufacturer: NIBCO Inc.
- Manufacturer #: NLJ300E
- Media: Water
- Pressure Rating: 200 psi
- Series: N-200-235
- Temperature Rating: 225 degF
- Trim Material: 416 Stainless Steel Stem/Aluminum Bronze Disc
The NIBCO® international lug type butterfly valve provides in-line Bubble tight shut-off at 200 psi. The valve delivers bi-directional dead-end service without a downstream flange at pressures of 200 psi (2 to 6 in), 150 psi (8 in) and 100 psi (10 to 12 in). The valve performs well in commercial applications including HVAC and hot/cold potable water. The NIBCO® cast iron butterfly valve provides ease of operation with quarter-turn (90 deg) open to close. The EPDM cartridge seat liner with aluminum bronze disc is recommended for most water applications. An extended neck allows for insulation up to 2 in. Please refer to NIBCO® technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® international cast iron butterfly valves for versatile and economical applications in commercial systems. These valves are backed by the NIBCO® 5-years 125% limited warranty.
NIBCO® Butterfly Valve, Lug Style International, Series: N-200-235, 2-1/2 in Nominal, 200 psi Pressure, 225 deg F, Media: Water, Lever Actuator, Cast Iron Body, 416 Stainless Steel Stem/Aluminum Bronze Disc Trim, EPDM/Buna-N Softgoods, 1.95 in ID Dimensions, Import
NIBCO® Butterfly Valve, Lug Style International, Series: N-200-235, 2-1/2 in Nominal, 200 psi Pressure, 225 deg F, Media: Water, Lever Actuator, Cast Iron Body, 416 Stainless Steel Stem/Aluminum Bronze Disc Trim, EPDM/Buna-N Softgoods, 1.95 in ID Dimensions, Import
- Features
- 225 deg F continuous and 250 deg F intermittent service
- Stainless steel stem with bronze bushings
- Extended neck
- Not recommended for steam service
- EPDM cartridge seat liner/Buna-N seal
- Operating mechanism: Bare stem, lever lock operating system, manual gear operator