Ball Drain™ H-50612 Pro-Pal® 5061 Standard Ball Valve w/ High Flow Hose Drain and Adjustable Packing Gland, 1/2" Nominal, C End Style, Forged Brass Body, Full Port, EPDM/PTFE Softgoods
WBSH50612
MFG #: H-50612
- Body Material: Forged Brass
- Domestic / Import: Import
- End Style: C
- Nominal Size: 1/2 in
- Port Type: Full
- Softgoods Material: EPDM/PTFE
- Manufacturer: NIBCO Inc.
- Manufacturer #: H-50612
- Media: Glycol Mixture / Oil / Water
- Pressure Rating: 600 psi CWP
- Series: Pro-Pal® 5061
- Temperature Rating: 250 deg F
- Trim Material: Brass/PTFE
- Type: Standard
Pro-Pal® valves are your best choice for efficient installation and system operation and for helping to control costs. Pro-Pal® valves combine commonly used components into a single forged brass alternatives that will save time and space in any installation. Instead of just building your next piping system, innovate it with Pro-Pal® series valves. Designed for use with water, oil, glycol mix in residential or commercial residential plumbing, commercial plumbing, heating systems. Refer to specification sheets for additional technical information. All Webstone products are backed by a limited lifetime warranty.
Webstone Ball Drain™ Ball Valve, Standard, Series: Pro-Pal® 5061, 1/2 in Nominal, C End Style, 600 psi CWP Pressure, 250 deg F, Full Port, Media: Glycol Mixture/Oil/Water, 1/2 in Orifice, Lever Handle Actuator, HCP Brass Ball, 2 in Inlet to Outlet Length, 2 in Top to Inlet Center, Forged Brass Body, Brass/PTFE Trim, EPDM/PTFE Softgoods, Import
Webstone Ball Drain™ Ball Valve, Standard, Series: Pro-Pal® 5061, 1/2 in Nominal, C End Style, 600 psi CWP Pressure, 250 deg F, Full Port, Media: Glycol Mixture/Oil/Water, 1/2 in Orifice, Lever Handle Actuator, HCP Brass Ball, 2 in Inlet to Outlet Length, 2 in Top to Inlet Center, Forged Brass Body, Brass/PTFE Trim, EPDM/PTFE Softgoods, Import
- Features
- Eliminate assemblies needed to isolate and drain any portion of a piped system
- Exclusive adjustable flow path allow for draining from either side of the ball
- Saves 27 min
- Replace four component
- Eliminate three leak path
- PTFE seat/stem seal
- Brass stem
- EPDM washer
- Reversible handle for added versatility
- Blow-out proof stem