Webstone The Isolator® Clean Brass™ H-51404W Ball Valve, 1 in, CxRotating Flange, Forged Brass Body, Full Port, PTFE Softgoods
WBS51404W
MFG #: H-51404W
- Body Material: Forged Brass
- Domestic / Import: Import
- End Style: C x Rotating Flanged
- Nominal Size: 1 in
- Port Type: Full
- Softgoods Material: PTFE
- Actuator Type: Lever
- Ball Material: HCP Brass
- Inlet to Outlet Length: 3-5/16
- Manufacturer: NIBCO Inc.
- Manufacturer #: H-51404W
- Media: Water/Glycol Mixture
- Series: 5140
- Temperature Rating: 100 degF
- Top to Inlet Center: 2-5/8
- Trim Material: Brass Stem and PTFE Seat
Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone valve is actuated by a blow-out proof stem and features an adjustable packing gland. Flange features a conical inlet to minimize turbulence. The rotating flange is secured by a snug-fit snap-ring that provides greater control over positioning during installation. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or overheat valves when soldering.
Webstone The Isolator® Clean Brass™ Ball Valve, Lead Free, Series: 5140, 1 in Nominal, CxRotating Flange, 600 psig WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Lever Actuator, HCP Brass Ball, 3-5/16 in Inlet to Outlet Length, 2-5/8 in Top to Inlet Center, Forged Brass Body, Brass Stem and PTFE Seat Trim, PTFE Softgoods
Webstone The Isolator® Clean Brass™ Ball Valve, Lead Free, Series: 5140, 1 in Nominal, CxRotating Flange, 600 psig WOG, 100 deg F, Full Port, Media: Water/Glycol Mixture, Lever Actuator, HCP Brass Ball, 3-5/16 in Inlet to Outlet Length, 2-5/8 in Top to Inlet Center, Forged Brass Body, Brass Stem and PTFE Seat Trim, PTFE Softgoods
- Features
- Full port forged brass uni-flange ball valve
- Detachable rotating flange, adjustable packing gland, nuts and bolts, bonus wing style T-handle
- The features and benefits you trust in our original Isolator® line with two versatile enhancements
- First, 360 deg flange rotation that allows for rotation to any deg necessary for your installation
- Second, a multifunction drain that makes the isolator the only valve that drains from both sides of the pump
- Unique uni-body design is preserved
- Solid forged brass outer flange
- Fully removable outer flange secured by snap ring
- Prevents electrolysis
- Eliminates galvanic corrosion
- 3-way ball purges before or after the pump
- Guaranteed for life
- Replaces 8 components
- Eliminate 7 leak paths
- Save 63 min of labor
- Compatible with popular press tools
- Snap ring provides greater control over installation
- Inner and outer flanges are designed to help prevent problems from over-torquing
- PTFE stem seal