NIBCO®
NIBCO® NL99K4A T-595-S6-R-66-LL 3-Piece Ball Valve, 1 in, NPT, Stainless Steel Body, Full Port, PTFE Softgoods, Import
NT595S6R66LLG
MFG #: NL99K4A
- Body Material: Stainless Steel
- Domestic / Import: Import
- End Style: NPT
- Nominal Size: 1 in
- Port Type: Full
- Softgoods Material: PTFE
- Actuator Type: Locking Lever
- Ball Material: Stainless Steel
- Inlet to Outlet Length: 3.62
- Manufacturer: NIBCO Inc.
- Manufacturer #: NL99K4A
- Media: Water
- Orifice Size: 1
- Pressure Rating: 1000 psi
- Series: T-595-S6-R-66-LL
- Temperature Rating: 400 degF
- Trim Material: Stainless Steel Stem and PTFE Seat
- Type: 3-Piece
The NIBCO® stainless steel ball valve provides bubble-tight shut-off at 1000 psi. This valve features threaded ends for easy installation. The 3-Piece valve may be used on hot/cold water, HVAC and is recommended for process piping, some chemical and utility service applications. This valve features a standard locking lever handle for security. It may be used for isolation and throttling (half open to full open only). The NIBCO® stainless steel ball valve provides ease of operation with quarter-turn (90 deg) open to close. The reinforced PTFE seat ring and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. Please refer to NIBCO® technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO® INC. 5-year 125% limited warranty.
NIBCO® Ball Valve, 3-Piece, Series: T-595-S6-R-66-LL, 1 in Nominal, NPT End Style, 1000 psi Pressure, 400 deg F, Full Port, Media: Water, 1 in Orifice, Locking Lever Actuator, Stainless Steel Ball, 3.62 in Inlet to Outlet Length, Stainless Steel Body, Stainless Steel Stem and PTFE Seat Trim, PTFE Softgoods, Import
NIBCO® Ball Valve, 3-Piece, Series: T-595-S6-R-66-LL, 1 in Nominal, NPT End Style, 1000 psi Pressure, 400 deg F, Full Port, Media: Water, 1 in Orifice, Locking Lever Actuator, Stainless Steel Ball, 3.62 in Inlet to Outlet Length, Stainless Steel Body, Stainless Steel Stem and PTFE Seat Trim, PTFE Softgoods, Import
- Features
- Valve pressure rating 1000 psi/69 bar non-shock cold working pressure
- Blowout-proof stem
- VB - Vented ball
- CS locking lever handle
- PTFE union seal, thrust washer