NIBCO® NL9510C T-585-70 2-Piece Ball Valve, 1-1/2 in, NPT, Cast Red Bronze Body, Full Port, PTFE Softgoods, Domestic
NT58570J
MFG #: NL9510C
- Body Material: Cast Red Bronze
- Domestic / Import: Domestic
- End Style: NPT
- Nominal Size: 1-1/2 in
- Port Type: Full
- Softgoods Material: PTFE
- Actuator Type: Standard Lever
- Ball Material: Chrome Plated Brass
- Inlet to Outlet Length: 4.72
- Manufacturer: NIBCO Inc.
- Manufacturer #: NL9510C
- Media: Air/Gas/Water
- Orifice Size: 1-1/2
- Pressure Rating: 600 psi
- Series: T-585-70
- Temperature Rating: 400 degF
- Top to Inlet Center: 3.16
- Trim Material: Silicon Bronze Stem
- Type: 2-Piece
The NIBCO® bronze ball valve provides bubble-tight shut-off at 600 psi. With the reinforced PTFE seat ring and brass hard chrome plated ball, the valve exhibits high chemical resistance properties. The 2-Piece valve is recommended for many high pressure applications, HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas. The NIBCO® bronze ball valve provides ease of operation with quarter-turn (90 deg) open to close. The 2-Piece valve features thread ends for easy installation. Please refer to NIBCO® technical data sheet, valve selection guides and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® ball valves are backed by the NIBCO® INC. 5-year 125% limited warranty.
NIBCO® Ball Valve, 2-Piece, Series: T-585-70, 1-1/2 in Nominal, NPT End Style, 600 psi Pressure, 400 deg F, Full Port, Media: Air/Gas/Water, 1-1/2 in Orifice, Standard Lever Actuator, Chrome Plated Brass Ball, 4.72 in Inlet to Outlet Length, 3.16 in Top to Inlet Center, Cast Red Bronze Body, Silicon Bronze Stem Trim, PTFE Softgoods, Domestic
NIBCO® Ball Valve, 2-Piece, Series: T-585-70, 1-1/2 in Nominal, NPT End Style, 600 psi Pressure, 400 deg F, Full Port, Media: Air/Gas/Water, 1-1/2 in Orifice, Standard Lever Actuator, Chrome Plated Brass Ball, 4.72 in Inlet to Outlet Length, 3.16 in Top to Inlet Center, Cast Red Bronze Body, Silicon Bronze Stem Trim, PTFE Softgoods, Domestic
- Features
- Valve pressure rating 600 psi/41.4 bar non-shock cold working pressure
- Blowout-proof stem
- Dezincification resistant
- PTFE seat ring/packing
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- Standard lever handle, optional NIB-SEAL®