Milwaukee® Tool 2855-20 M18 FUEL™ 1/2 in Compact Impact Wrench With Friction Ring, 1/2 in Square Drive, 250 ft-lb, 18V

MIL285520 MFG #: 2855-20
  • Bare Tool / Kit: Bare Tool
  • Battery Included: No
  • Drive Size: 1/2 in
  • Drive Type: 4-Mode Straight
  • Type: Impact Wrench
  • Voltage Rating: 18 V
  • Battery Type: Lithium-ion
  • Height: 8 in
  • Length: 5 in
  • Manufacturer: Milwaukee Tool
  • Manufacturer #: 2855-20
  • Series: M18 FUEL™
  • Torque: 250 ft-lb
  • Width: 2-1/2 in
The M18 FUEL™ 1/2" Compact Impact Wrench with Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.9" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2" Compact Impact Wrench has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge.

  • Features
  • 4.9" in length provides most access in tight spaces
  • The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque
  • Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
  • 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
  • Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
  • Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
  • Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
  • Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
  • REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
  • Compatible with all M18™ batteries & Chargers