3019630 BPW 1155 Single-Flush Manual Exposed Flushometer, Polished Chrome
SLO3019630
MFG #: 3019630
- Finish / Color: Polished Chrome
- Flush Rate: 1.6 gpf
- Inlet Size: 1 in IPS
- Pressure Rating: 15 to 80 psi
- Spud Coupling: 1-1/2 in
- Connection Location: Top Spud
- Fixture Type: Water Closet
- Handle Type: Non-Hold Open Oscillating
- Manufacturer: Sloan Valve Company
- Manufacturer #: 3019630
- Material: Semi-Red Brass
- Series: BPW 1155
- Type: Single-Flush
- Valve Design: Diaphragm
Royal® Slimline® bedpan washer water closet flushometer with deoseptic unit, for floor mounted or wall hung top spud bowls. For installation where clearance is required around grab bars. installation meets ADA height requirements.
Sloan® Royal® Manual Exposed Flushometer, Single-Flush, Series: BPW 1155, Water Closet Fixture, 1.6 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, Diaphragm, Connection Location: Top Spud, 15 to 80 psi, Non-Hold Open Oscillating, Semi-Red Brass, Polished Chrome
Sloan® Royal® Manual Exposed Flushometer, Single-Flush, Series: BPW 1155, Water Closet Fixture, 1.6 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, Diaphragm, Connection Location: Top Spud, 15 to 80 psi, Non-Hold Open Oscillating, Semi-Red Brass, Polished Chrome
- Features
- Exposed water closet, diaphragm model flushometer is intended for floor-mounted or wall-hung top spud bowls
- Incorporates a patented one-piece construction body design, maintaining the spray arm in an upright position
- Presents a leaner, more aesthetic installation, reducing possible bacteria growth on hidden and hard-to-reach surfaces found on other bedpan washer units
- Eliminates the need for unsanitary hose sprays, as well as the additional housekeeping that hoses require and the potential for patient slippage
- Valve body, stop body, diverter body and diverter pivot made from brass casting using semi-red brass for durability and long life
- PERMEX® synthetic rubber diaphragm with dual filtered fixed by-pass
- Valve body, cover, tailpiece and control stop shall be in compliance with ASTM alloy classification for semi-red brass