3459610 BPW 1150 ESS Single-Flush Sensor Exposed Flushometer, Hardwired, Polished Chrome
SLO3459610
MFG #: 3459610
- Finish / Color: Polished Chrome
- Flush Rate: 1.6 gpf
- Inlet Size: 1 in IPS
- Power Source: Hardwired
- Pressure Rating: 15 to 80 psi
- Spud Coupling: 1-1/2 in
- Connection Location: Top Spud
- Fixture Type: Water Closet
- Manufacturer: Sloan Valve Company
- Manufacturer #: 3459610
- Material: Semi-Red Brass
- Rough-In Size: 26-1/2 in
- Sensor Range: 22 to 42 in
- Series: BPW 1150 ESS
- Type: Single-Flush
- Valve Design: Diaphragm
Exposed, Sensor Activated Royal® Bedpan Washer Water Closet Flushometer, for floor mounted or wall hung top spud bowls. Installation meets ADA height requirements.
Sloan® Royal® Sensor Exposed Flushometer, Single-Flush, Series: BPW 1150 ESS, Water Closet Fixture, Hardwired, 1.6 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, 26-1/2 in Rough-In, Diaphragm, Connection Location: Top Spud, 22 to 42 in Sensor, 15 to 80 psi, Semi-Red Brass, Polished Chrome
Sloan® Royal® Sensor Exposed Flushometer, Single-Flush, Series: BPW 1150 ESS, Water Closet Fixture, Hardwired, 1.6 gpf Flush, 1 in IPS Inlet, 1-1/2 in Spud Coupling, 26-1/2 in Rough-In, Diaphragm, Connection Location: Top Spud, 22 to 42 in Sensor, 15 to 80 psi, Semi-Red Brass, Polished Chrome
- Features
- Exposed water closet, diaphragm model flushometer is intended for floor-mounted or wall-hung top spud bowls
- Incorporates a patented one-piece construction body design, maintaining the spray arm in an upright position
- Presents a leaner, more aesthetic installation, reducing possible bacteria growth on hidden and hard-to-reach surfaces found on other bedpan washer units
- Eliminates the need for unsanitary hose sprays, as well as the additional housekeeping that hoses require and the potential for patient slippage
- Valve body, stop body, diverter body and diverter pivot made from brass casting using semi-red brass for durability and long life
- Permex® synthetic rubber diaphragm with dual filtered fixed bypass
- Valve body, cover, tailpiece and control stop shall be in conformance with ASTM alloy classification for semi-red brass