Zoeller®

Zoeller® 292-0002 N292 High Head Waste-Mate Submersible Sewage Pump, Non-Automatic, 1/2 hp, 115V, Cast Iron

ZOEN292 MFG #: 292-0002
Zoeller® 292-0002 N292 High Head Waste-Mate Submersible Sewage Pump, Non-Automatic, 1/2 hp, 115V, Cast Iron
  • Flow Rate: 135 gpm
  • Material: Cast Iron
  • Motor HP: 1/2 HP
  • Non-Automatic / Automatic: Non-Automatic
  • Outlet Size: 2 or 3 in FNPT
  • Amperage Rating: 15 A
  • Bearing Type: Ball
  • Cord Length: 20 ft
  • Cord Type: 3-Wire Neoprene
  • Frequency Rating: 60
  • Impeller Type: Non-Clogging Vortex
  • Manufacturer: Zoeller Company
  • Manufacturer #: 292-0002
  • Maximum Head: 40 ft
  • Phase: 1
  • Series: High Head Waste-Mate
  • Speed: 3450
  • Temperature Rating: 130 degF
  • Voltage Rating: 115 V
Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller's cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, powder coated epoxy finish and hermetically sealed, oil-filled motor add up to a long lasting, trouble-free product.

Submersible Sewage Pump, 1-Phase 1-Seal High-Head, Series: Waste-Mate 290, 135 gpm, 2 or 3 in FNPT Outlet, 40 ft Maximum Head, 1/2 hp, 115 VAC, 15 A, 60 Hz, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W
  • Features
  • Durable, cast iron constructed switch case, base, motor and pump housing
  • No sheet metal parts to rust or corrode
  • All cast iron class 30 30000 lb tensile strength
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
  • Shaft seal - stainless steel carbon and ceramic rotary
  • 1117 carbon steel motor shaft (single seal models)
  • Corrosion-resistant, powder coated epoxy finish
  • Upper and lower ball bearing running in a bath of oil
  • Neoprene square ring and gasket
  • All models pass 2 in spherical solids
  • Automatic units available with float-operated, submersible, 2-pole mechanical switch
  • 100% computerized tested
  • 20 ft cord
  • Non automatic operation
  • Permanent split capacitor or 3 phase motor type
  • Class B insulation