Liberty Pumps®

LE102M3 LE100 1-Phase Submersible Sewage Pump, 1 hp, 208 to 230 VAC, 3 in Flanged Outlet, Cast Iron, 8 A

LIBLE102M3 MFG #: LE102M3
LE102M3 LE100 1-Phase Submersible Sewage Pump, 1 hp, 208 to 230 VAC, 3 in Flanged Outlet, Cast Iron, 8 A
  • Flow Rate: 160 gpm
  • Material: Cast Iron
  • Motor HP: 1 HP
  • Outlet Size: 3 in Flanged
  • Amperage Rating: 8 A
  • Bearing Type: Ball
  • Cord Length: 10 ft
  • Cord Type: SJTW
  • Dimensions: 18.9 in H x 12.5 in W
  • Frequency Rating: 60 Hz
  • Impeller Type: 2 Vane Semi-Open
  • Manufacturer: Liberty Pumps
  • Manufacturer #: LE102M3
  • Maximum Head: 39 ft
  • Motor Speed: 1725 rpm
  • Phase: 1
  • Series: LE100
  • Service Factor: 1
  • Voltage Rating: 208 / 230 VAC
Liberty's LE100-series is a 1 hp sewage pump with 2 in solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish and stainless steel fasteners, the LE100 is designed for years of trouble-free performance. Its quick-disconnect power cord allows for easy interchange and is available in 10 ft, 25 ft and 35 ft lengths. The LE100 can be ordered in 2 in or 3 in discharge configurations and a wide range of voltages.

Liberty Pumps® Submersible Sewage Pump, 1-Phase, Series: LE100, 160 gpm, 3 in Flanged Outlet, 39 ft Maximum Head, 1 hp, 208 to 230 VAC, 8 A, 60 Hz, 1725 rpm Motor, SJTW Cord, Service Factor: 1, 2 Vane Semi-Open Impeller, 221 deg F Thermal Overload, Ball Bearing, Cast Iron, 18.9 in H x 12.5 in W
  • Features
  • Product Videos
  • Rugged 2 vane, semi-open cast iron impellers
  • Cast iron housings and volute with all stainless steel and brass fasteners
  • 17-4 PH stainless shaft
  • Oil-filled, hermetically sealed motor
  • Built-in thermal protection on single phase models
  • Adjustable pumping range
  • Unitized shaft seal
  • Single float mechanical level control with series plug for manual bypass operation - standard on single-phase automatic models
  • 10 ft quick-disconnect power cord allows replacement of cord in seconds without breaking seals to motor
  • 2 in solids handling
  • 140 deg F maximum fluid
  • Maximum flow of 160 gpm at 12 ft of total dynamic head
  • Manual operation