Smith

Smith® 1800Y06 (-CID) Roof and Overflow Drain With Deck Plate, 6 in Outlet, No-Hub Connection, Cast Iron Drain

JRS1800Y06CID MFG #: 1800Y06 (-CID)
Smith® 1800Y06 (-CID) Roof and Overflow Drain With Deck Plate, 6 in Outlet, No-Hub Connection, Cast Iron Drain
  • Connection Type: No-Hub
  • Drain Material: Cast Iron
  • Dimensions: 48 in OAL x 24 in OAW
  • Manufacturer: Jay R. Smith Mfg. Co
  • Manufacturer #: 1800Y06 (-CID)
  • Outlet Size: 6 in
  • Series: 1800
Used on flat roofs of any construction (other than poured in place) where an emergency overflow drain can be used in combination with a standard roof drain. Large sump drain bodies with low profile domes provide sufficient free area for quick drainage of rainwater while protecting the drain sump and connected piping from the intrusion of debris. Internal standpipe type overflow drain receives water only when the build-up is greater than the setting of the standpipe. Water dam standpipe can be cut to achieve various water depths on the roof. Attached wide dual drain deck plate with securing holes enables both drains to be secured to the roof deck from the top surface of the roof reducing installation time, reducing the number of roof penetrations and eliminating the need for an underdeck clamp. The wide dual deck plate also recesses the drains slightly to prevent water build-up at the base of the drains.

Smith® Roof and Overflow Drain, Series: 1800, 6 in Outlet, No-Hub Connection, Cast Iron Drain, 48 in OAL x 24 in OAW Dimensions
  • Features
  • CID: cast iron dome
  • Eliminates need for underdeck clamp
  • Roof drain installation can be performed from the top of the roof deck
  • Requires only one rectangular roof penetration
  • Recesses the drains slightly to prevent water build-up at the base of the drains
  • Drains can be preassembled to deck plate and then put in place
  • Drains and deck plate are securely fastened in place
  • Duco cast iron bodies with combined flashing clamp and gravel stop for roof drain and combined flashing clamp and gravel stop with 3-1/2 in high internal water dam standpipe for overflow drain polyethylene domes
  • 102.5 sq-in free area
  • Note: stated flow rates for roof drains are based on particular test piping configurations and dimensions
  • Installed roof drain flow rates cannot be stated unless the attached piping configuration is known and the effects of the drainage calculated
  • This dimension to internal stop of speed-set gasket