Smith® 1074Y06 (-C-CID-R) Standpipe Overflow Drain With Adjustable Extension, 6 in Outlet, No-Hub Connection, Cast Iron Drain
JRS1074Y06CCIDR
MFG #: 1074Y06 (-C-CID-R)
- Connection Type: No-Hub
- Drain Material: Cast Iron
- Dimensions: 15-1/4 in Dia
- Manufacturer: Jay R. Smith Mfg. Co
- Manufacturer #: 1074Y06 (-C-CID-R)
- Outlet Size: 6 in
- Series: 1074
- Type: Standpipe
Used in flat roofs of any construction where a constant height of water is desired on the roof. It is also used on conventional roofs as a safety overflow, which receives water only when the build-up is greater than the setting of the standpipe. Standpipe type water dam can be cut to achieve various water depths on the roof.
Smith® Overflow Drain, Standpipe, Series: 1074, 6 in Outlet, No-Hub Connection, Cast Iron Drain, 15-1/4 in Dia Dimensions
Smith® Overflow Drain, Standpipe, Series: 1074, 6 in Outlet, No-Hub Connection, Cast Iron Drain, 15-1/4 in Dia Dimensions
- Features
- C: underdeck clamp
- CID: cast iron dome
- R: sump receiver
- Wide clamping surface holds flashing and roofing materials without puncturing
- Large low profile dome provides sufficient free area for quick drainage of rain water and protects the drain sump and connected piping from the intrusion of debris
- 102.5 sq-in free area
- Adjustable extension sleeve, reversible collar, PVC. Standpipe, combined flashing clamp and gravel stop
- Note: stated flow rates for roof drains are based on particular test piping configurations and dimensions
- Installed roof drain flow rates cannot be stated unless the attached piping configuration is known and the effects of the drainage calculated