Uponor

Uponor Ecoflex® 5216920 Single Potable Pipe, 2 in PEX, 1.93 in THK Wall, R Factor 9.5, Polyethylene

WIR5216920 MFG #: 5216920
Uponor Ecoflex® 5216920 Single Potable Pipe, 2 in PEX, 1.93 in THK Wall, R Factor 9.5, Polyethylene
  • Material: Polyethylene
  • R Factor: 9.5
  • Type: Single
  • Wall Thickness: 1.93 in
  • Inside Diameter: 1.629
  • Manufacturer: Uponor
  • Manufacturer #: 5216920
  • Outside Diameter: 2-1/8
  • Temperature Rating: 73 to 200 degF
  • Thermal Conductivity: 0.25
Ecoflex potable PEX single pipes are designed for potable-water distribution applications. The Uponor AquaPEX service pipes in Ecoflex potable PEX piping are manufactured by the Engel-method (PEX-a) process and are listed to ASTM F876 and F877. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.

Uponor Ecoflex® Potable Pipe, Single, 2 in PEX Nominal, 1.629 in Inside Dia, 2-1/8 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 9.5, 73 to 200 deg F, Polyethylene
  • Features
  • Includes
  • Corrugated, seamless high-density polyethylene (HDPE), UV-protected jacket
  • Multilayered, closed-cell, crosslinked polyethylene (PEX) foam insulation
  • 0.1 g/100 sq in/day vapour permeability
  • 18 in bend radius
  • Install Ecoflex potable PEX single in hot or cold potable-water applications
  • Join pipes using Uponor ProPEX® or WIPEXTM fittings
  • Ecoflex end caps are required on all exposed ends of Ecoflex pipes to avoid ground water contamination
  • Crosslinked polyethylene material
  • SDR-9 engel method of manufacture
  • Use ProPEX fittings up to 3 in or WIPEX fittings for the whole range
6.9 in Jacket, 300 ft Coil