WATTS®

WATTS® 0750164, LF15M2-E LF15M2 Water Hammer Arrester, 1 in, NPT, 150 psi, Import

WATLF15M2EG MFG #: 0750164
WATTS® 0750164, LF15M2-E LF15M2 Water Hammer Arrester, 1 in, NPT, 150 psi, Import
  • Domestic / Import: Import
  • End Style: NPT
  • Nominal Size: 1 in
  • Pressure Rating: 150 psi
  • Body Material: Copper
  • Dimensions: 12-11/16 in L
  • Manufacturer: Watts Water Technologies
  • Manufacturer #: 0750164
  • Series: LF15M2
  • Softgoods Material: EPDM O-Ring
  • Temperature Rating: 33 to 180 degF
The noise from banging pipes is caused by shocks of high speed water flowing in the piping system when a fixture is suddenly closed. Sudden stoppage of the water (a non-compressible liquid) flowing at a given pressure and velocity causes a surge or spike of water and is called water hammer. When this occurs, a pressure wave travels back through the piping until it finds a point of relief. The LF15M2 and LF15M2S Water Hammer Arrestors are designed to eliminate this effect. The LF15M2 and LF15M2S features Lead Free* construction to comply with Lead Free* requirements.

WATTS® Water Hammer Arrestor, Series: LF15M2, 1 in Nominal, NPT, 150 psi, 33 to 180 deg F, Copper Body, EPDM O-Ring, 12-11/16 in L, Import
  • Features
  • NPT solid hex brass adapter or solder end connection for easy installation
  • Approved for installation with no access panel required
  • May be installed in new or existing plumbing systems with a standard pipe tee vertically, horizontally or at any angle
  • PDI Listed (PDI WH201)
  • Maintenance free piston is the only moving part
  • Air preload is 60 psi (4.2 bar)
  • Factory air charged and permanently sealed
  • Polypropylene piston
  • Lead free brass threaded adapter