Caleffi

Caleffi DISCAL® 551035A Air Separator, 1-1/4 in, C, 150 psi Working, 32 to 250 deg F, Brass

CLF551035A MFG #: 551035A
Caleffi DISCAL® 551035A Air Separator, 1-1/4 in, C, 150 psi Working, 32 to 250 deg F, Brass
  • Connection Type: C
  • Material: BRASS
  • Nominal Size: 1-1/4 in
  • Temperature Rating: 32 to 250 deg F
  • Working Pressure: 150 PSI
  • Dimensions: 5-3/16 in W x 8-1/4 in H
  • Manufacturer: Caleffi
  • Manufacturer #: 551035A
  • Series: 551
  • Suitable Media: Water/Glycol Solution
The DISCAL® air separator uses a coalescing element that consists of an element of concentric diamond pattern mesh surfaces. This element creates the whirling movement required to facilitate the release of micro-bubbles and their adhesion to these surfaces. The bubbles, fusing with each other, increase in volume until the buoyancy force overcomes the adhesion force to the surface. They rise to the top of the unit from where they are released through a float-operated automatic air release valve.

Caleffi DISCAL® Air Separator, Series: 551, 1-1/4 in Nominal, C, 150 psi Working, 32 to 250 deg F, Suitable Media: Water/Glycol Solution, Brass, 5-3/16 in W x 8-1/4 in H
  • Features
  • Product Videos
  • Air separators are used to continuously remove the air contained in the hydronic circuits of heating and cooling systems
  • The air discharge capacity of these devices is very high
  • They are capable of removing automatically all the air present in the system down to the micro-bubble level
  • The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from noise, corrosion, localized or mechanical damage
  • Micro-bubbles, fusing with each other, increase in volume (get larger) until they become large enough to rise to the top where they are automatically released
  • Stainless steel float guide pin and linkage
  • 1/2 in FNPT bottom thread
  • Glass reinforced nylon internal element
  • Up to 100% removal air separation efficiency