Sioux Chief

521-118R Stub Out Bracket With Extruded Hole, 25 lb, Steel, Copper Plated, Domestic

SIO521118R MFG #: 521-118R
521-118R Stub Out Bracket With Extruded Hole, 25 lb, Steel, Copper Plated, Domestic
  • Domestic / Import: Domestic
  • Finish: Copper Plated
  • Load Capacity: 25 lb
  • Material: Steel
  • Dimensions: 20 in L x 1-1/4 in H
  • Manufacturer: Sioux Chief
  • Manufacturer #: 521-118R
  • Series: 521
Sioux Chief's copper plated stub out bracket shall be used where necessary to support 1/2, 3/4 or 1 in nominal copper stub outs for water supply lines. Holes for positioning copper tube shall be located on 2 in or 4 in center lines depending on model number. Bracket shall be produced from cold-roll steel, copper plated and include aprotective water based clear coat finish to minimize surface rust when arriving at jobsite. Depending on model number, bracket may feature extruded holes, providing a wider soldering surface. Bracket may also feature rolled edges to provide additional strength.

Stub Out Bracket, Series: 521, 25 lb, Steel, Copper Plated, 20 in L x 1-1/4 in H, Domestic
  • Features
  • Extruded model provides four time the soldering surface for extra strength
  • Heat the tube, not the bracket
  • Using approved hardware, secure bracket with nail or screw to stub through pilot hole
  • Insert copper stub out into pipe hole, apply flux and solder copper making sure to heat the tube, not the bracket
  • Excessive heat applied directly to bracket could result in burning off the plated finish
  • 16 ga steel