622-069004MJ-031 Tapping Sleeve, Mechanical Joint Connection, Carbon Steel Clamp, Flexi-Coat® Fusion Bonded Epoxy Coated

SMI6.4622MJ MFG #: 622-069004MJ-031

Clamp Material: Carbon Steel
Connection Type: Mechanical Joint
Finish: Flexi-Coat® Fusion Bonded Epoxy Coated
Nominal Size: 6 x 4 in
Bolt Material: 304 Stainless Steel
Bolt Size: 5/8-11 UNC x 6 in L
Gasket Material: Buna-N
Manufacturer: Xylem
Manufacturer #: 622-069004MJ-031
Pressure Rating: 175 psi
Series: 622
Temperature Rating: 180 degF

Smith-Blair tapping sleeves consist of two sections of heavy welded steel that bolt together on the pipe and seal against a concave wedge gasket around the tap opening. The outlet half has a recessed flat-faced flange to mate with standard tapping valves MSS SP 60 up through 12 in size-on-size. For tap sizes 14 in and above, flanges can be furnished to accommodate the valve requirements.

Smith-Blair Tapping Sleeve, Series: 622, 6 x 4 in Nominal, Mechanical Joint, 175 psi, 180 deg F, 5/8-11 UNC x 6 in L Bolt, 304 Stainless Steel Bolt, Carbon Steel Clamp, Buna-N Gasket, Flexi-Coat® Fusion Bonded Epoxy Coated

Features
Includes

Easy to install
Has range to reduce inventory
Virtually 360 deg support of the pipe
Roll-resistant gasket will not bind
Gasket seal increases with line pressure
No special tools required to install the sleeve
Flanged outlets are recessed to accept tapping valves
Flexi-Coat® fusion bonded epoxy finish is standard for superior corrosion resistance
3/4 in test outlet to allow hydrostatic pressure test before tapping the pipe
6.9 to 7.2 in OD sleeve

Carbon Steel Flange/Neck/V-Lug, 5/8 in Carbon Steel Type A Plain Washer and Stainless Steel 5/8-11 UNC x 6 in L Bolts and 5/8 in-11UNC Nuts