Anvil®

Anvil® 0560009193 Type C Beam Clamp, 3/8 in Rod, 1-1/4 in THK, 500/250 lb, Ductile Iron, Hot Dipped Galvanized

GRI93EGC MFG #: 0560009193
Anvil® 0560009193 Type C Beam Clamp, 3/8 in Rod, 1-1/4 in THK, 500/250 lb, Ductile Iron, Hot Dipped Galvanized
  • Finish: Hot Dipped Galvanized
  • Load Capacity: 500/250 lb
  • Material: Ductile Iron
  • Rod Size: 3/8 in
  • Manufacturer: Anvil International
  • Manufacturer #: 0560009193
  • Series: FIG 93
  • Temperature Rating: 450 degF
  • Type: Type C
SPF/Anvil® Beam Clamp, Type C, Series: FIG 93, 3/8 in Rod, 500/250 lb, 1-1/4 in Thickness, Ductile Iron, Hot Dipped Galvanized, 450 deg F
  • Features
  • Attached to horizontal flanges of structural members in either the top beam or bottom beam positions
  • Secured in place by a cup-pointed set screw tightened against the flange
  • A jam nut is provided for tightening the set screw against the body casting
  • Thru tapping of the body casting permits extended adjustment of the threaded rod
  • Wider throat for attaching to flange with up to 1-1/4 in thickness
  • Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 1-1/2 in
  • Hardened steel cup point set screw and locknut
  • 60 in-lb torque
  • Universal wide throat beam clamp
  • 500 lb top/250 lb bottom