- Voltage Rating: 115 VAC
- Amperage Rating: 1.9 A
- Bearing Type: Sleeve
- Dimensions: 15-1/4 in L x 8-1/2 in H
- Frequency Rating: 60 Hz
- Impeller Type: Centrifugal
- Manufacturer: Xylem
- Manufacturer #: 102206
- Maximum Pressure: 125 psi
- Motor HP: 1/6
- Motor Speed: 1725 rpm
- Phase: 1
- Series: PR Series
- Temperature Rating: 225 deg F
- Type: 3-Piece
For applications requiring higher flow and head pressures, Bell & Gossett provides an entire range of booster pumps. The designs of these pumps are based on 3-part configuration which offers complete field repairability and compact construction. All Bell & Gossett boosters are equipped with the incomparable Bell & Gossett manufactured motor for quiet and efficient operation.
Bell & Gossett Booster Pump, 3-Piece, 1/6 hp, 115 VAC, 1.9 A, 60 Hz, 1 ph, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 15-1/4 in L x 8-1/2 in H
Bell & Gossett Booster Pump, 3-Piece, 1/6 hp, 115 VAC, 1.9 A, 60 Hz, 1 ph, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 15-1/4 in L x 8-1/2 in H
- Features
- Oil lubricated circulator
- Cast iron body
- 115 V with built-in overload protection
- Sleeve bearing, oil lubricated with replaceable resilient motor mounts
- Noise dampening coupler
- Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute
- Long bronze sleeve bearings maintain exact shaft alignment
- Provides for constant circulation of oil over bearing surfaces
- Precision ground pump shaft is oversized to provide large bearing surfaces
- Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
- The Bell & Gossett standard mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems
- Centrifugal impeller prevents accumulation of air at seal faces to assure long life
- Close impeller/body tolerances minimize water slippage and maximize efficiency
- 3/4, 1, 1-1/4 and 1-1/2 in NPT flange
- Steel, Zinc Plated or Lead-Free Brass impeller
- Drip proof motors
- Recommended for indoor use only
- Model PR