Oatey®

Oatey® FlowGuard Gold® 31917 Low VOC CPVC Solvent Cement With UV Indicator, 8 oz, Liquid, Yellow, 0.94 +/- 0.02

OAT31917 MFG #: 31917
Oatey® FlowGuard Gold® 31917 Low VOC CPVC Solvent Cement With UV Indicator, 8 oz, Liquid, Yellow, 0.94 +/- 0.02
  • Color: Yellow
  • Container Size: 8 oz
  • Form: Liquid
  • Specific Gravity: 0.94 +/- 0.02
  • Flash Point: 14 to 23
  • Manufacturer: OATEY
  • Manufacturer #: 31917
  • Net Weight: 16
  • Odor / Scent: Solvent
  • Setting Time: 4 to 5
  • Type: Low VOC
  • VOC Content: 490
Oatey® FlowGuard Gold® All Weather CPVC Cement with UV Indicator is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its UV indicator allows for quick and easy inspection of dry fit joints using any ultraviolet light source. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

Oatey® FlowGuard Gold® CPVC Solvent Cement, Low VOC, 8 oz, 16 lb Net Weight, Liquid, Yellow, Solvent, 490 g/L VOC, 14 to 23 deg F Flash, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Chloroethene, Homopolymer, Chlorinated, 0.94 +/- 0.02 Specific Gravity, 4 to 5 min Setting Time
  • Features
  • All weather yellow cement solvent welds CPVC, dauber included
  • For cold and hot water systems up to 200°F / 93°C
  • Allows for quick, easy inspection of dry fit joints with UV light
  • Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
  • Approved for use with FlowGuard Gold® piping systems (registered trademark of The Lubrizol Corporation)
  • Recommended application temperature of 0°F to 115°F / -17°C to 46°C
  • No primer needed where local codes permit
  • Low VOC, high performance solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, meets ASTM Standard F493 and complies with NSF/ANSI 61 health effects requirements