Honeywell MS4120F1006/U Damper Actuator, 120 VAC, 175 in-lb, Aluminum, Import

HONMS4120F1006 MFG #: MS4120F1006/U

Domestic / Import: Import
Material: Aluminum
Torque Rating: 175 lb-in
Voltage Rating: 120
Dimensions: 10.67 in H x 3.94 in W x 2.95 in D
Manufacturer: Honeywell
Manufacturer #: MS4120F1006/U
Motor Timing: 15 sec at 60 Hz
Mounting Type: Direct Coupled

The Honeywell Fast-Acting, Two-Position Actuators are line volt (120 V), 80 lb-in., spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (CW) or counterclockwise (CCW) spring rotation.

Damper Actuator, 120 VAC, 175 in-lb, Motor Timing: 15 sec at 60 Hz, Direct Coupled Mount, Aluminum, 10.67 in H x 3.94 in W x 2.95 in D, Import

Honeywell_MS4120F1006U_Specification_Sheet.pdf(Specification Sheet)

Features
Includes

80 lb-in minimum driving torque at 350 deg F
Integral spring return ensures level of return torque
15 sec spring return timing
No special cycling required during long-term holding
No audible noise during holding
Patent pending design eliminates need for limit switches to reduce power consumption
95 deg angle of rotation
Actuator holds rated torque at reduced power level
Die-cast aluminum housing
Housing design allows flush mounting to damper
Designed to operate reliably in smoke control systems requiring UL555S ratings up to 350 deg F
(2) Integral 3/8 in flexible conduit connections
60 Hz frequency
40 in PTFE-jacketed cable electrical connections
5 to 95% RH operating humidity, non-condensing
Power consumption: Driving - 0.35 A, 35 W, holding - 0.15 A, 10 W
-40 to 140 deg F shipping and storage temperature
-40 to 130 deg F ambient temperature
Environmental, electrical or ingress protection rating: NEMA 2, IP54
No internal auxiliary switch