Sign In to View Pricing & Availability
Please call for availability and specification confirmation.
A.Y. McDonald® Ball Valve Corporation Stops come standard with 360 deg operating head and are designed for low turning torques and high pressures (300 psig). The PTFE coated ball is supported by two blow-out proof EPDM seals. The end piece joint is sealed with an EPDM O-ring and thread locker. There is no metal-to-metal contact which causes high torques. The bubble-tight feature at 300 psig makes these valves a better choice than a plug valve when test or operating pressures over 100 psig are expected. All McDonald® Ball Valve Corporation Stops are available with a wide variety of end connections. They are made in the United States of America and are manufactured to meet or exceed the AWWA C800 (latest revision) standard, except where noted.
McDonald® Ball Corporation Stop, 1x1-1/4 in Nominal, AWWA/CC Tapered ThreadedxC Flare, 300 psi, Full Port, Media: Water, Brass Ball, 5.2 in Inlet to Outlet Length, 1-1/2 in Top to Inlet Center, Brass Body, EPDM Softgoods
- End piece joint sealed with an EPDM O-Ring and thread locker
- PTFE coated brass ball rotates 360 deg
- Blow-out proof EPDM port seals
- EPDM O-ring/port seal
- Body MaterialBRASSEnd StyleAWWA/CC Tapered Threaded x C FlareNominal Size1 x 1-1/4 inPort TypeFullSoftgoods MaterialEPDMBall MaterialBRASSInlet to Outlet Length5.2ManufacturerA.Y. McDonaldManufacturer #5142-013MediaWaterPressure Rating300 psiTop to Inlet Center1-1/2