Zoeller® 53-0029 BN53 Mighty-Mate Submersible Pump, Automatic, 1 hp, 115V, Cast Iron

ZOEBN53 MFG #: 53-0029

Flow Rate: 43 gpm
Motor HP: 3/10 hp
Series: Mighty-Mate
Voltage Rating: 115 V
Amperage Rating: 9.7 A
Bearing Type: Sleeve
Cord Length: 9 ft
Cord Type: 3-Wire
Domestic / Import: Domestic
Enclosure Type: Auto Reset Thermal Overload
Frequency Rating: 60 Hz
Impeller Type: Non-Clogging Vortex
Manufacturer: Zoeller Company
Manufacturer #: 53-0029
Master Float: Vertical
Material: Cast Iron
Maximum Head: 19-1/4 ft
Non-Automatic / Automatic: Automatic
Outlet Size: 1-1/2 in NPT
Phase: 1
Speed: 1550 rpm
Temperature Rating: 130 degF

Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With Zoeller's cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

Submersible Pump, Single Phase Single Seal Non-Automatic, Series: Mighty-Mate 50, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Auto Reset Thermal Overload, Sleeve Bearing, Cast Iron, 10-3/32 in W x 10-1/16 in H, Domestic

Features
Includes

Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available
Corrosion-resistant, powder coated epoxy finish
No steel sheet metal parts to rust or corrode
Stainless steel screws, guard, handle and switch arm
No screens to clog
Watertight, neoprene square ring between motor and pump housing
Solid, buoyant, polypropylene float
Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
Upper and lower sleeve bearings running in bath of oil
Entire unit pressure-tested after assembly
Carbon and ceramic shaft seal
Passes 1/2 in spherical solids
Watertight and dust-tight
Permanently oiled bearings
7-1/4 in on point, 3 in off point
Cast iron switch case, motor and pump housing
Engineered thermoplastic base
Engineered, glass-filled, plastic impeller with metal insert
Stainless steel guard and handle
Lower and upper bearings, oil-fed cast iron