Sign In to View Pricing & Availability
- Ecoflex thermal single pipes are designed for fluid transfer in heating and cooling applications. The Wirsbo hePEX service pipe in Ecoflex thermal single piping is manufactured by the Engel-method (PEX-a) process and is listed to ASTM F876 and F877. An oxygen-diffusion barrier extruded onto the service pipe dramatically reduces the amount of oxygen molecules that can migrate through the tubing wall. This oxygen-diffusion barrier protects ferrous components within the fluid pathway from corrosion. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.
Uponor Ecoflex® Thermal Pipe, Single, 2 in Nominal, 1.629 in Inside Dia, 2-1/4 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 9.5, 73.4 to 200 deg F, Polyethylene
- Corrugated, seamless high-density polyethylene (HDPE), UV-protected jacket
- Multilayered, closed-cell, crosslinked polyethylene (PEX) foam insulation
- 0.1 g/100 sq in/day vapour permeability
- 18 in bend radius
- 73.4 deg F at 160 psi hydrostatic rating
- 180 deg F at 100 psi hydrostatic rating
- 200 deg F at 80 psi hydrostatic rating
- Install Ecoflex thermal single pre-insulated pipe in buried or aboveground hydronic radiant heating and cooling applications
- Use Uponor ProPEX or WIPEX DZR brass compression fittings
- Ecoflex end caps are required on all exposed ends of Ecoflex pipes to avoid ground water contamination
- Crosslinked polyethylene material
- SDR-9 engel method of manufacture
- Use ProPEX fittings up to 3 in or WIPEX fittings for the whole range
- 6.9 in Jacket, 300 ft Coil
- MaterialPolyethyleneNominal Size2 inR Factor9.5TypeSingleWall Thickness1.93 inInside Diameter1.629ManufacturerUponorManufacturer #5016920Outside Diameter2-1/4Temperature Rating73.4 to 200 degFThermal Conductivity0.25