WATTS® 0547105 2-Piece Ball Valve With Handle, 1-1/4 in, Forged Brass Body, Full Port, PTFE Softgoods, Import
WATFBV3CH
MFG #: 0547105
- Body Material: Forged Brass
- Domestic / Import: Import
- Nominal Size: 1-1/4 in
- Port Type: Full
- Softgoods Material: PTFE
- Ball Material: Chrome Plated Brass
- Inlet to Outlet Length: 3-3/16
- Manufacturer: Watts Water Technologies
- Manufacturer #: 0547105
- Media: Gas/Liquid
- Orifice Size: 1-1/4
- Pressure Rating: 600 psi
- Temperature Rating: -40 to 400 degF
- Top to Inlet Center: 2-13/16
- Trim Material: Virgin PTFE Seat
- Type: 2-Piece
Series FBV-3C, FBVS-3C 2-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blow-out proof stem, virgin PTFE seats, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated brass ball, brass adapter, and steel handle. Model FBV-3C has threaded end connections. Model FBV-3C-TH has tee handle with threaded connections. Model FBVS-3C has solder end connections. Model FBVS-3C-TH has tee handle with solder connections. Pressure Rating: For 1/4 to 2 in. - 600psi WOG; 150psi WSP; For 2 1/2 to 4 in. - 400psi WOG; 125psi WSP.
WATTS® Ball Valve, 2-Piece, 1-1/4 in Nominal, 600 psi, -40 to 400 deg F, Full Port, Media: Gas/Liquid, 1-1/4 in Orifice, Chrome Plated Brass Ball, 3-3/16 in Inlet to Outlet Length, 2-13/16 in Top to Inlet Center, Forged Brass Body, Virgin PTFE Seat Trim, PTFE Softgoods, Import
WATTS® Ball Valve, 2-Piece, 1-1/4 in Nominal, 600 psi, -40 to 400 deg F, Full Port, Media: Gas/Liquid, 1-1/4 in Orifice, Chrome Plated Brass Ball, 3-3/16 in Inlet to Outlet Length, 2-13/16 in Top to Inlet Center, Forged Brass Body, Virgin PTFE Seat Trim, PTFE Softgoods, Import
- Features
- 1/4 to 3 in CSA approved threaded valves
- 1/4 to 2 in UL/FM approved threaded valves
- Fluorocarbon elastomer stem O-Ring prevents stem leaks
- Adjustable stem packing gland
- Bottom loaded blow-out proof stem
- Machined chrome plated brass ball
- Valves comply to MSS-SP-110 standard
- Recommended for open/close applications
- Brass packing nut
- Zinc plated carbon steel handle nut
- This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder to 420 deg f
- High temperature solders may damage the seat material
- PTFE stem packing seal/thrust washer