Sioux Chief

550-PB2 Bend Support, Nylon, Domestic

SIO550PB2 MFG #: 550-PB2
550-PB2 Bend Support, Nylon, Domestic
  • Domestic / Import: Domestic
  • Material: Nylon
  • Dimensions: 3.52 in L x 0.85 in W
  • Manufacturer: Sioux Chief
  • Manufacturer #: 550-PB2
  • Series: 550-PB
Sioux Chief's Simple Bend Support is designed support 1/2 or 3/4 in PEX when penetrating a wall. The Simple Bend Support shall also be used to re-direct 1/2 or 3/4 in PEX tubing thus eliminating two crimp joints. Design shall include a bend radius such that the elbow does not kink the tube. A minimum of 3 formed ribs provides strength and maintains the radius once elbow is mounted the side of a stud or joist, or installed on the tube to re-direct the run. Minimally, there shall be two small holes located on the center tab of the elbow, which are used to secure the elbow to the structure.

Bend Support, Series: 550-PB, Nylon, 3.52 in L x 0.85 in W, Domestic
  • Features
  • Includes
  • Forms tight 90 degree bend in flexible CTS without kinking
  • Different mounting option available for securing directly to structure
  • Secure plastic elbow to side of stub or joist using approved hardware (not provided)
  • Install nail or screw in both hole to prevent elbow from moving
  • Carefully install tube into one open end of elbow then bend tube around and capture in opposite end of elbow, do not kink tube
  • Glass filled nylon
1/2 in PEX Simple Bend Support