ICP™ - Comfortmaker® / Tempstar®
D5FSAAH18XBK 1.5 Ton QuietComfort® Vertical Ductless Air Handler w/ R-454B Refrigerant, 18.5 SEER2, 18,000 BTU/hr Cooling, 18,000 BTU/hr heating
Sign In to View Pricing & Availability
- The D5FSAA series air handler unit ductless systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires. This selection of fan coils permits creative solutions to design problems such as: • Add-ons to current space (an office or family room addition) • Special space requirements • When changes in the load cannot be handled by the existing system • Historical renovations or any application where preserving the look of the original structure is essential. These compact indoor fan coil units take up very little space above the ceiling. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
D5FSAAH18XBK 1.5 Ton QuietComfort® Vertical Ductless Air Handler w/ R-454B Refrigerant, 18.5 SEER2, 30 to 42.5 dBA, 208/230 V, 1 Phase, Direct Drive, 32 to 90 degrees F, 400 to 618 cfm, 18,000 BTU/hr Cooling, 18,000 BTU/hr Heating, Galvanized Steel
- Low Sound Levels: When noise is a concern, the ductless systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
- Secure Operation: If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through the ductwork. In addition, since outdoor units can be installed close to an outside wall, coils are protected from vandals and severe weather.
- Fast Installation: This compact ductless system is simple to install. A mounting bracket and duct work is needed for the indoor units, and only wire and piping need run between the indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the air handler systems the equipment of choice, especially in retrofit situations.
- On all indoor units, service and maintenance expense is reduced due to easy accessible service panels. In addition, these air handler systems have extensive self-diagnostics to assist in troubleshooting.
- Built-in Reliability: The air handler ductless system indoor and outdoor units are designed to provide years of trouble-free operation. The air handler indoor units include protection against freeze-up and high evaporator temperatures on heat pumps.
- Economical Operation: The air handler ductless system design allows individual or multi-room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns.
- Leak Mitigation: The unit is equipped with a refrigerant leak detection sensor.
- Easy-to-use-Controls: The air handler units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user-friendly control provides the interface between the user and the unit.
- Multi-Poise Installation: Designed for maximum installation flexibility. The secondary drain built-in allows the unit to be mounted in an upflow, downflow, left or right installation depending on existing conditions.
- 24V Interface: The built-in 24V Interface allows users to control the ductless system with a third party heat pump thermostat.
- Easy Fault Code Checking: • The Air Handler system can intelligently self-detect the failure cause and generate a corresponding code. • The installer or user can easily check the fault code displayed on the electric function board by opening the lid. • It helps you proactively determine the failure cause, prepare for repairing parts ahead of field maintenance work, and greatly improve work efficiency.
- Automatic Air Flow Adjustment: During the operation, when the dust filter or evaporator is clogged with dust, the load of the system and motor torque increases. The microprocessor on the unit can detect this change and adjust the fan speed to keep the CFM stable.
- Manual (3), Remote Controller, Battery (2), Cable Ties (8), Insulation Sleeve (2), Flare Nut (2), Braze to Flare Adapter (2)
- Cooling Capacity18,000 Btu/hrHeating Capacity18,000 BTU/hrNominal Capacity1.5 tonRefrigerant TypeR-454BSEER2 Rating18.5Sound Level30 to 42.5 dBAAirflow TypeUpflow, Downflow, Right and LeftDimensions17.52 in W x 45 in H x 21.02 in DDrive TypeDirectFace Area3 sq. ftFin TypeLouveredFins per Inch20Flow Rate400 to 618 cfmFrequency Rating60 HzLiquid Line Size1/4 inManufacturerInternational Comfort ProductsManufacturer #D5FSAAH18XBKMaterialGalvanized SteelMaximum Line Length98.42 ftMotor HP0.34 HPNumber of Circuits6Number of Rows3Phase1Rated Motor RPM550SeriesQuietComfortSuction Line Size1/2 inTemperature Rating32 to 90 deg FTypeDuctlessVoltage Rating208 / 230 VWeight104.72 lbs