Commercial W62 Series Ball Valve Wall Mount Ball Valve Hose Cock, Chrome

DW6270VAC MFG #: W6270VAC

DELTA® Ball Valve Hose Cock, Lever, 1 Handles, 3/8 in, NPT, 2-1/4 in Maximum Deck Thickness, Wall Mount, Brass, Chrome Plated, Import, Commercial

Ball valve hose cock
1/4" IP tail
2.38" shank
1-7/8" wall flange
Non-removable lever handle
Check piston located in nozzle to prevent contamination of service lines and valve sealing surfaces (with exception of vacuum service)
Vacuum valves supplied with corrosion resistant ball and FKM o-rings for improved durability
Rated to maximum 125 psi testing pressure
Colored index button to suit desired service
Maintenance free- no need to regrease sealing surfaces or take valve apart
Every ball valve carries its date of manufacture on the underside of the body
Use of this ball valve above 40 psi requires special clamping procedures by others to ensure that any hoses attached to nozzle do not blow off
Life cycle tested to up to 100,000 cycles
Single ball valve assembled in wall mount flange-assembled shank, brass locknut, raised lockwasher for positive grip
Assembled shank: shank (N) 2.38 in OAL [was SH3] (1.88 in exposed)
Indexed for: VAC - vacuum (yellow)
Shank with 1/4 in tailpiece and coupling

▲