Beacon-Morris®
Beacon-Morris® TWIN-FLO III® K-120 Hydronic Kickspace Heater, 115 VAC, 0.74 A, 1 to 3 gpm
Sign In to View Pricing & Availability
- TWIN-FLO III heaters are for use with forced hot water residential heating systems and consist of a copper tube, aluminum finned heating element, with an electric motor and blower of unique cross flow design. Their purpose is to deliver a comfortable stream of warmed air, at or near floor level, and their construction is extremely compact so minimum space is required for installation.
Beacon-Morris® TWIN-FLO III® Hydronic Kickspace Heater, 115 VAC, 0.74 A, 1 to 3 gpm, 23 in Width, 12-3/4 in D, 4 in Height, 8425 to 12990 Btu/hr
- Kickspace heaters are the space-saving alternative to hot water baseboard
- The type K heater is primarily used in horizontal floor installation, for example under a kitchen counter cabinet, or bathroom sink enclosure
- They are ideal for radiant systems with the use of a low temperature aquastat designed to turn the unit on at 110 deg F
- Type W is for vertical mounting, fully recessed in the wall studs, with the air discharged upward through a flush mounted, louvered front panel
- Type F is a surface mounted wall unit, with the air discharged evenly through a louvered front panel in an upward direction
- All types have heating elements with 1/2 in nominal (5/8 in O.D) copper tube connections and 115 V
- Electric blower motor, interwired with a 120 deg F (49 deg C) reverse acting aquastat that prevents operation until hot water is circulating
- These units are NOT intended to be used on one or two pipe steam systems
- For gravity fed systems, it is recommended that a separate circulator pump be installed for the kickspace heater
- Designed to fit inconspicuously under a cabinet, in the floor, on or in the wall
- Hot water from the home's boiler is circulated through the kickspace unit and the fan gently blows heated air into the room
- The homeowner simply selects the fan speed, then the unit turns on and off automatically according to heating demand
- 127 cfm high speed
- 3200 rpm
- 0.068 hp motor
- 66.8 watt
- Amperage Rating0.74 AVoltage Rating115 VACDepth12-3/4Heat Capacity8425 to 12990 Btu/hrHeight4 inManufacturerMestekManufacturer #K-120Width23 in