CentriPro®

SPD20075F Variable Speed Standard Drive Simplex Pump Controller With Filter

GOUSPD20075F MFG #: SPD20075F
SPD20075F Variable Speed Standard Drive Simplex Pump Controller With Filter
  • Amperage Rating: 26.4 A
  • Suitable For Use With: 3-Phase 7.5 hp Submersible and Centrifugal Pump
  • Voltage Rating: 208 / 230 V
  • Manufacturer: Xylem
  • Manufacturer #: SPD20075F
  • Type: Variable Speed
A variable speed pump controller made specifically for single pump booster applications. Comes complete with pressure transducer and standard NEMA 3R outdoor rated enclosure.

CentriPro® Aquavar® SPD Plus™ Simplex Pump Controller, Variable Speed Standard Drive, 208/230 V, -22 to 122 deg F Ambient, 26.4 A, For Use With: 3-Phase 7.5 hp Submersible and Centrifugal Pump
  • Features
  • Easy set-up - Pre-set for surface motor characteristics, pre-wired and tested transducer
  • Pre-wired and tested transducer
  • Touch button pressure setting
  • No complicated menus or electrical jargon to cope with
  • Total set up time including wiring is less than 30 min
  • Dual phase - The same drive can be used for either three phase or single phase input (de-rated)
  • Transducer - As with all Goulds water technology drives, the pressure transducer is included with the drive so there is no need for separate sourcing and compatibility checks
  • The transducer is pre-wired and tested, with internal case grounding
  • Full diagnostics - In addition to typical electrical protection and diagnostics, the S-Drive has a full range of pump protection features such as bound pump or motor shut down, low water or loss of prime shut down
  • These added features require no added input devices
  • Program security - The flashing LED status indicator will not fade in outdoor use the way LCD screens do, and the internal single push button discourages tampering by untrained operating or maintenance personnel
  • Remote on/off - Permits external control by timers (irrigation), float or pressure switches (tank draining) or manual control
  • Reduces the need for separate patch panels
  • Remote monitoring - External monitors may be connected to the drive for pump running speed (Hz), pump on and system fault
  • The fault indicator can also be connected to devices like an auto-dialer
  • This enables control of pumps and drives in un-manned locations
  • Dual set point - The S-drive has the capability to be programmed with two pressure set points
  • An external contact such as a timer can be used to change between them, so that a booster pump serving both a building and an irrigation system can do both jobs without manual resets