Rain Bird®

Rain Bird® 100-DVF In-Line Irrigation Valve, 1 in FNPT, 15 to 150 psi, Plastic

RAB100DVF MFG #: 100-DVF
Rain Bird® 100-DVF In-Line Irrigation Valve, 1 in FNPT, 15 to 150 psi, Plastic
  • Connection Type: 1 in FNPT
  • Material: Plastic
  • Pressure Rating: 15 to 150 psi
  • Flow Rate: 0.2 to 40 gpm
  • Height: 4-1/2 in
  • Manufacturer: Rain Bird
  • Manufacturer #: 100-DVF
  • Series: DVF
  • Type: In-Line
  • Voltage Rating: 24
  • Width: 3-1/3 in
Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required. All of our residential valves work with any standard sprinkler timer. (Note: not recommended for use with 2-wire systems).

Rain Bird® Irrigation Valve, In-Line, Series: DVF, 1 in FNPT, 15 to 150 psi, 24 VAC, 0.2 to 40 gpm, 3-1/3 in Width, 4-1/2 in Height, Plastic
  • Features
  • Double-filtered (diaphragm and solenoid) pilot-flow design for maximum reliability and grit resistance
  • Buna-N, balanced pressure diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring
  • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter
  • Unique, easy-to-turn patented pressure assisted flow control mechanism
  • External bleed to manually flush system of dirt and debris during installation and system start-up
  • Internal bleed for spray-free manual operation
  • Accepts Rain Bird TBOS latching solenoid for use with most battery-operated controllers
  • Operates in low-flow and Landscape Drip applications when a 200 mesh filter is installed upstream
  • Not recommended for use with two-wire control systems
  • For flows below 3 gpm or any Xerigation® application, use a 200 mesh filter installed upstream
  • Water temperature: Up to 110 deg F
  • Ambient air temperature: Up to 125 deg F
  • 0.45 A inrush current, 0.25 A holding current
  • Solenoid coil resistance: 38 Ohm
  • 4-3/8 in L