RIDGID®

RIDGID® 36018 K-45 Sink Drain Cleaning Machine, 3/4 to 1-1/2 in Drain Line, 115 VAC

RID36018 MFG #: 36018
RIDGID® 36018 K-45 Sink Drain Cleaning Machine, 3/4 to 1-1/2 in Drain Line, 115 VAC
  • Drain Line Capacity: 3/4 to 1-1/2 in
  • Voltage Rating: 115 VAC
  • Amperage Rating: 3.2
  • Control Type: Autofeed®
  • Drum Capacity: 50 ft of 5/16 in and 35 ft of 3/8 in Cable
  • Manufacturer: RIDGID Tools
  • Manufacturer #: 36018
  • Speed: 0 to 600
  • Tool / Kit: KIT
K-45 is a hand held drain cleaning machine used to clean secondary drain lines (such as found in kitchens, bathrooms and utility rooms) from 3/4 in to 2-1/2 in diameter with the correct cable. Depending on the cable choice, the drum will hold up to 50 ft of cable. The K-45 is available with two feed styles, manual feed and AUTOFEED® (AF). Both have a slide action chuck for quick locking/releasing of the cable. The AUTOFEED allows the cable to be advanced and retrieved with the push of a lever. Helps keep hands and work area clean. The manual version requires that the cable be fed in and out of the drum by hand. The K-45 is a double insulated design equipped with a polarized plug. A FOR/REV switch controls drum and cable rotation and the variable speed ON/OFF switch provides control of the motor. The two piece twist-lock drum will not dent or corrode, and allows easy access to the inner drum. The inner drum allows quick cable change out, helps prevent cable flip over in the drum, and reduces the likelihood of drum leakage.

RIDGID® Sink Drain Cleaning Machine, Kit, 3/4 to 1-1/2 in Drain, 115 VAC, 3.2 A, 50 ft of 5/16 in and 35 ft of 3/8 in Cable Drum, 0 to 600 rpm, Autofeed® Control
  • Features
  • Includes
  • Excellent for small line cleaning and opens clogged lavatory, sink lines, urinals and tub or shower drains
  • Advanced two-way AUTOFEED® control keeps hands and work area clean - Advances and retrieves cable with push of a lever
  • Manual version has a slide-action chuck for quick locking/releasing of cable (Not available in Europe)
  • Lightweight, easy-to-use, no setup required
  • Variable speed power unit rotates cable 0 to 600 rpm
  • Two-piece twist lock canister with interchangeable inner drum - Makes cable change-out simple; easy to match the right cable for the job
  • Inner drum prevents water leaks and greatly reduces cable flip-over inside the drum
  • Drums won't rust or dent-ever
  • Includes RIDGID® drain cleaning mitt and operator's manual
  • Inner core cables: (Models C-1IC, C-6IC, C-13IC, C-2IC, C-23IC) vinyl-wrapped inner core to prevent core from rusting to spring - enhances cable life, Compression wound for strength, Resists kinking and negotiates tough bends and traps and provides good flexibility and cleaning power to the cable end
  • 120 V 50/60 Hz double insulated single-phase universal motor
  • 5/16 in x 25 ft inner core cable with inner drum
  • For 3/4 to 2-1/2 in drain lines
56782 - 5/16 in x 25 ft Inner Core with Bulb Auger